NUVO Lighting 60-7133 Axis, 3 Light, Semi-Flush Fixture, Matte Black Finish with Brushed Nickel Accents, Clear Glass

Bulbs aren't included with the Axis 60-7133, so order three lamps with it. It takes E12 candelabra base bulbs in a B10 shape, rated up to 60W each on 120V. Dimming depends entirely on the lamp you choose, so if you're putting it on a dimmer, pick a dimmable B10 candelabra lamp.

No. The Axis 60-7133 is rated for dry locations and indoor use only, so keep it out of covered porches, breezeways, and shower or tub areas. For a bath it would need at least a damp rating; an exterior ceiling needs a wet or damp location fixture.

Semi-flush, ceiling mounted. The body sits close to the ceiling with the three globes below it rather than suspended on a stem or chain, which is why the overall drop is only 10.75 inches. If you want adjustable hang height over an island or stairwell, you want a pendant instead; if you need the absolute minimum projection in a low-ceiling hallway, a true flush mount is the better call.

It carries a cULus safety listing, which covers both US and Canadian installations. Electrically it's a 120V dry-location indoor fixture, so it suits apartment corridors, offices, and hospitality interiors where a dry-location listed luminaire is acceptable.

It comes in a single finish combination, matte black with brushed nickel accents, with clear glass globes on a steel and glass body. The look is industrial, so it pairs with exposed-bulb black hardware rather than with traditional or transitional trim. Because it's an Axis collection piece, other Axis fixtures in the same finish are the straightforward way to carry the look through a hall and entry.

At 4.29 pounds the Axis 60-7133 is light enough for a standard ceiling outlet box with the supplied mounting strap. No extra bracing needed for the weight itself.

No. It's an incandescent-technology fixture with three replaceable candelabra sockets and no CCT selectable switch. Color temperature is whatever lamp you install, so if a facility standard calls for 2700K or 3000K across the building, specify that on the bulbs rather than the fixture.