NUVO Lighting 60-7351 Ryder, 1-Light, Wall Sconce Fixture, Black Finish with Polished Nickel Sockets

Yes. The Ryder 1-light sconce carries a Damp location rating, so it can go in a bathroom or over a vanity where it sees humidity but no direct water spray. NUVO classifies it as a Vanity & Wall fixture for indoor use only, so keep it off covered porches and other exterior walls that would need a wet-location fixture.

It takes one standard A19 lamp with an E26 medium screw base, rated to 60W maximum at 120V. No bulb is supplied, so order lamps separately. Because the fixture is an incandescent-style socket with no integral driver, dimming depends entirely on the lamp you install, pair a dimmable LED or an incandescent A19 with the dimmer, or you will get flicker.

No. The Ryder is not ADA compliant, and with a 5.5 inch projection it exceeds the 4 inch limit for wall-mounted objects in an accessible route. For corridors and egress paths in a commercial or multi-family building, specify an ADA-rated sconce instead. The Ryder is fine in bedrooms, baths, and other spaces outside the accessible route.

It is cETLus listed, which covers both US and Canadian requirements and is accepted in place of a UL listing by inspectors in both countries. The fixture is also RoHS compliant. Note the California Prop 65 disclosure for lead, which matters if you are shipping into California and tracking those notices.

Body is steel in a black finish with polished nickel sockets, and the fixture weighs 0.6 lbs. At that weight a standard wall box carries it, no extra blocking or bracing needed.