NUVO Lighting 60-7352 Ryder, 2 Light, Vanity Fixture, Black Finish with Polished Nickel Sockets

Yes. The Ryder 60-7352 carries a Damp location rating and is an indoor fixture, so it is fine over a tub-adjacent vanity or in a steamy bathroom. It is not rated for wet locations like an open shower spray or an exterior wall. Safety listing is cETLus, which covers both US and Canadian installs.

Bulbs are not included. Each of the two sockets is a medium E26 base taking an A19 lamp at 60W maximum per socket, on 120V. You can run LED A19 retrofits in it; the fixture itself is incandescent technology, so nothing in it limits you to filament lamps.

Yes, the Ryder 60-7352 is listed ADA compliant, and its 3.88 inch extension from the wall keeps it inside the 4 inch protrusion limit that matters in a corridor or accessible restroom. That makes it usable in institutional and multi-family work where fixture projection is reviewed.

The fixture is a 2-light wall-mount vanity with exposed polished nickel sockets and no glass, so it can be hung with the lamps up or down depending on how you want the light thrown. With no shades, downward lamps put more glare at eye level above a mirror; most installers run these up. Overall it measures 4.75 inches wide, 14.75 inches high, and extends 3.88 inches from the wall.

Dimming is lamp dependent on this fixture. There is no integrated driver, so the two E26 sockets pass straight through to the switch: a standard incandescent A19 will dim on a common incandescent dimmer, while an LED A19 dims only if that lamp is marked dimmable and matched to the dimmer type. Pick the lamp to suit the dimmer you already have on the wall.

Yes, and that is the usual approach with this one. At 4.75 inches wide the Ryder is a single vertical fixture rather than a horizontal bar, so for a long or double-sink vanity property managers typically flank the mirror with a pair, or run three across. Each needs its own wall box, so plan the rough-in before the drywall closes.

No. It is a socketed incandescent-technology fixture with no CCT selection and no onboard LED module. Color temperature is entirely whatever A19 lamp you install, which means you can standardize a building on one lamp color and swap it later without touching the fixture.

The body is steel with a black finish and polished nickel sockets, and the whole fixture weighs 1.2 lbs, so it hangs off a standard wall box without extra bracing. There is no glass to break or replace during a turnover, which is part of why the exposed-socket industrial look gets specified for multi-family.

The fixture is RoHS compliant and is flagged under California Prop 65 for lead. If you are a procurement buyer shipping into California, that warning needs to carry through on your documentation.

Model 60-7352 is the black body with polished nickel sockets, and that is the one configuration this part number covers. If you need a different body color in the Ryder collection, it is a different NUVO part number rather than an option on this one.