NUVO Lighting 60-7411 Dover, 1-Light, Medium Pendant, Black with Vintage Brass

The Dover pendant ships with (2) 6 inch and (2) 12 inch downrods, giving a maximum overall height of 46.5 inches with all four installed. The fixture body itself is 10 inches tall, so you can drop it anywhere from roughly that height to 46.5 inches by leaving rods out. On an 8-foot ceiling over an island, running just one 6 inch rod keeps the bottom of the shade well clear of head height. Supply wire is 144 inches, so slack is not an issue.

It takes one standard medium (E26) base A19 lamp rated up to 60W, and no bulb is included, so order lamps separately. A19 is the common household shape, so an LED A19 with an E26 base drops right in. Dimming depends entirely on the lamp you choose, the fixture adds no driver of its own, so pair a dimmable LED with a compatible dimmer if you want control.

No. The Dover pendant is rated for dry locations and indoor use only. That rules out covered porches, exterior soffits, and any spot exposed to moisture or shower steam. For a bath, keep it outside the tub or shower zone, and for an exterior or damp application pick a fixture carrying a damp or wet location rating instead.

The Dover carries a cETLus safety listing, which covers both US and Canadian requirements, and runs on standard 120V line voltage. It is a dry location indoor fixture, so typical uses are corridors, lobbies, apartment kitchens, and dining areas rather than anything exposed. Note the fixture is flagged under CA Prop 65 for lead, which matters if you are submitting disclosure paperwork on a California job.

At 4.46 lbs the Dover is light enough for any standard listed ceiling outlet box, including a pancake box on a solid ceiling. It is a ceiling-mount pendant only, there is no wall or sloped-adapter configuration, so the box needs to be in the ceiling at the hang point. Hardware mounts to the box with the included downrods making up the drop.

No on both counts. The Dover is an incandescent-technology fixture with a socket, not an integrated LED, and it has no CCT selector switch. Color temperature is whatever lamp you put in it, so if you need 3000K across a project, buy the A19 lamps to that spec. The upside is the socket is serviceable and relampable rather than a sealed LED module.

One finish combination is offered on the 60-7411: black with vintage brass accents, a two-tone mid-century look on a metal body. If you are standardizing a dining room or a run of units, the same Dover collection finish pairing is what to specify so the pendants read identically across openings.