NUVO Lighting 60-7647 Zelda, 1-Light Pendant, Medium Base, 60W, Black Finish, White Metal Shade, Faux Leather Straps

The Zelda pendant ships with two 6 inch and two 12 inch downrods, which gives a maximum overall height of 50.79 inches. The fixture body itself is 14 inches high and 14 inches in diameter, so the rods set how far it drops below the canopy. Combine or leave out rods to land where you want over an island or table.

It takes a single medium base (E26) lamp, A19 shape, 60 watts max at 120V. No bulb is included, so order lamps separately. Dimming depends entirely on the bulb you put in it, there is no driver in the fixture to limit you.

The Zelda pendant is damp location rated and listed for indoor use, so a bathroom or an enclosed, covered area is fine. It is not wet rated, so keep it out of open exterior locations where rain or sprinklers can reach it. Safety listing is cETLus.

The shade is metal, cone shaped, finished white inside a black steel body. Shade measures D:14.00 H:7.56. The faux leather straps are decorative trim on the black frame. Total fixture weight is 4.22 lbs, light enough for a standard ceiling outlet box with an approved bar hanger.

Mounting is ceiling only, on downrods. It is a rod-hung pendant, not an adjustable-cord or flush-mount fixture, so plan on a flat ceiling drop between 14 inches (no rods) and 50.79 inches with all four supplied rods in use.

Each Zelda is a single-light, single-shade fixture at 14 inches across. For a standard island most spec writers run two or three on center spacing wider than the 14 inch diameter so the shades do not crowd. For multi-family or hospitality standardization, the only option offered is the black finish with the white metal shade, so repeat orders match.

Yes. The Zelda pendant is flagged for lead under California Proposition 65. That matters for institutional and government procurement paperwork, so include the warning in submittals where your jurisdiction requires it.