NUVO Lighting 60-7740 Colby 1-Light Wall Sconce, Matte Black and Antique Copper Finish

No bulb is packed with the Colby 60-7740. It takes one G9 double loop base lamp, T4 shape, up to 60W, so you need to buy the lamp separately. Order the bulbs with the fixtures if you are doing a multi-unit install, otherwise the sconces mount and then sit dark.

Yes. The Colby 1-light sconce is damp location rated and classed for indoor use, which covers a bathroom vanity wall out of direct spray. It is 24 inches high, 8.13 inches wide, and projects 6 inches off the wall, so lay out mirror clearance before you set the box. Keep it out of the shower enclosure, which needs a wet rated fixture.

No. The Colby 60-7740 is not ADA compliant, and its 6 inch extension from the wall exceeds the 4 inch maximum projection allowed for fixtures mounted between 27 and 80 inches above the floor in a circulation path. For corridors and egress routes, specify an ADA sconce with 4 inches or less of projection. It is fine on a vanity wall, a bedroom, or any wall outside the accessible route.

Dimming is lamp dependent. The fixture itself has no driver, it is an incandescent-technology socket on 120V line voltage, so whether it dims comes down to the G9 lamp you install. A standard incandescent or halogen G9 will dim on an ordinary forward-phase dimmer; a G9 LED retrofit only dims if that lamp is marked dimmable and matched to the control.

Both. The Colby is a wall-mounted sconce in the up-or-down subcategory, so the same fixture installs with the lamp end pointed either direction. That matters on a 24 inch tall body: aimed down over a mirror it washes the counter, aimed up it bounces light off the ceiling. Decide before you set the mounting strap so the trim lands right.

It carries a cULus safety listing, which covers both US and Canadian installations, and it is RoHS compliant. Note the Prop 65 disclosure for lead, which matters if you are shipping into California and your spec requires the notice passed through.

The 60-7740 is built one way: matte black with antique copper accent, frosted glass. There is no second finish under that part number, so if you are standardizing a building on one look, 60-7740 is the single orderable configuration.

The Colby reads transitional, a plain steel body in matte black with an antique copper accent and frosted glass. That sits between traditional and contemporary, which is why it mixes with existing oil-rubbed or bronze hardware in multi-family and hospitality turnovers without a full room redo.