NUVO Lighting 62-1323 Bend, LED Large Vanity, Brushed Nickel Finish with White Acrylic

It is rated for damp locations and listed for indoor use only, so it works in a bathroom with normal shower humidity, including above a tub. It is not a wet location fixture, so keep it out of direct spray inside a shower enclosure and off covered exterior porches.

The LED is integrated into the Bend vanity, so there is nothing to lamp and nothing to relamp later. Average rated life is 30,000 hours. When the LED module reaches end of life the fixture is replaced, not re-bulbed, which is worth knowing if you are standardizing a multi-unit building on serviceable socketed fixtures instead.

In most cases yes, if your existing fixture mounts to a single wall box on the same centerline. The Bend is a 36.25 inch continuous bar with a white acrylic diffuser, so it will cover the footprint of a typical multi-head bar of similar length, and it runs on standard 120V line voltage. Two things to check first: the old fixture's backplate may have left unpainted wall or exposed holes outside the new 4.5 inch tall body, and because the LED is integrated you lose the ability to swap bulbs for a different color temperature later.

Yes, it dims. It is a 120V integrated LED fixture drawing 39W, so it needs an LED-compatible (electronic low-voltage or LED/CFL rated) dimmer, not an old incandescent-only rotary. Standard line-voltage LED dimmers in a single-gang box handle it.

It puts out 2,730 lumens at 39W across a 36.25 inch bar, which is enough for general grooming light over a double vanity in most bathrooms. CRI is 90, so skin tones and makeup colors read accurately, which is the reason most buyers care about CRI on a vanity fixture. Color temperature is fixed, not field selectable.

Color temperature is fixed on this fixture, with no field-selectable CCT switch. If you are matching several bathrooms in one building and need to tune the white point per room, you want a selectable-CCT vanity bar instead. The only option offered here is the brushed nickel finish with white acrylic diffuser.

It is a wall-mount fixture with a steel body weighing 4.45 lbs, so a standard wall-mounted junction box with a crossbar handles it without blocking or added support. Keep the box centered on your intended fixture centerline, since the 36.25 inch bar mounts off that single box.

The Bend LED vanity is RoHS compliant. It does carry a California Prop 65 notice for lead, which is routine on metal-bodied fixtures and is a disclosure, not a use restriction. Procurement teams that track both will find the RoHS declaration and the Prop 65 listing on the same fixture.