NUVO Lighting 62-1466 Lightgate, LED Sconce, 5W, Black Finish, 3000K

No. The Lightgate 62-1466 carries a Damp location rating, not Wet. That means it belongs under a covered porch, a soffit, a breezeway, or a recessed entry where it stays out of direct rainfall and standing water. For an uncovered wall on the weather side of a building you need a Wet rated fixture instead. The housing is aluminum and steel, so it handles outdoor humidity fine once it is under cover.

240 lumens at 5 watts. That is accent-level output, not area lighting. It reads as a wall wash beside a door, a unit number marker, or a path of light down a corridor of entries, and at 4.75 inches square it is a small fixture doing a small job. If you need to actually light a landing or a stair for security, plan on pairing them or stepping up to a higher lumen fixture. The 90 CRI means paint and brick colors hold up well under it.

Fixed at 3000K. The 62-1466 is not a CCT selectable fixture, so there is no field switch to move it to 2700K or 4000K. If you are adding to a building that already runs a different color temperature outside, this one will not blend, and you would want to match the existing fixtures instead. 3000K is a warm white, the usual choice for residential and hospitality entries.

It dims, and no, there is no bulb to replace. The LED is integrated into the fixture, rated 30,000 average hours, so when the light source finally goes the fixture gets swapped rather than relamped. For dimming, it is a 120V line voltage fixture, so it wants a dimmer rated for LED loads. At 5 watts a single one of these sits well below the low end of most dimmers, which is worth knowing if you are putting one fixture on one dimmer rather than a run of them on a circuit.

It is cETLus safety listed, which is the ETL mark recognized in both the US and Canada, so it satisfies the listed-luminaire requirement an inspector looks for on a commercial job in either country. Note the location rating is Damp, so the inspector's other question, whether it is in a protected location, is the one to get right on the drawing.

Wall mount, hard wired to 120V. At 1.54 pounds it is a light fixture, so a standard outdoor rated wall box carries it without extra blocking. Because it is a line voltage fixture and not low voltage, there is no transformer or driver to locate remotely, everything is in the 4.75 inch housing.

Black is the only finish the 62-1466 is built in, so every one you order matches the next, which is what you want when you are running the same fixture down a row of unit entries or across a courtyard. The style is contemporary, a single shade in a square aluminum and steel body. If a project needs bronze or brushed nickel outside, this model will not get you there.

Yes, lead is the listed Prop 65 chemical for the 62-1466. If you are buying for a California job or shipping into the state, that warning has to travel with the product. The fixture is separately RoHS compliant, which is the European restricted substances standard and a common line item on institutional and government submittals.

On the Lightgate 62-1466 the 90 CRI does real work outdoors. It is what keeps brick, stone, stained wood, and signage looking like their actual color at night instead of going flat and gray the way a low CRI outdoor LED does. For hospitality and multi-family entries, where the front of the building is the first thing a guest or tenant sees, it is the difference between an entry that looks finished and one that looks lit by a parking lot fixture. Paired with the warm 3000K output it reads as lamplight rather than security lighting.