NUVO Lighting 62-1567 8W, LED 1-Light Vanity Fixture, 3000K, Brushed Nickel with Alabaster Glass

The 62-1567 is rated for damp locations and indoor use only. That covers a normal bathroom vanity wall, including the humidity of a shower running, but it is not a wet-location fixture, so don't put it directly inside a shower enclosure or anywhere it takes direct water spray. Outdoor use is out.

The LED is integrated, so there is no socket and no lamp to buy or replace. It draws 8 watts and delivers 670 lumens, with an average rated life of 50,000 hours. When the LED reaches end of life you replace the fixture, not a bulb, which is worth knowing if you're specifying these across a lot of units.

The 62-1567 is dimmable and runs on 120V line voltage. Because the driver is integrated rather than a standard lamp, it needs an LED-compatible dimmer; an old incandescent-rated dimmer with a high minimum load can flicker or drop out with an 8 watt fixture. If the bathroom still has a legacy dimmer on it, plan on swapping it for an LED/CFL-rated one.

It's a single-light fixture measuring 5 inches wide by 7.75 inches high, with a 7.37 inch extension off the wall. The shade itself is 5 inches in diameter by 5 inches high. That extension is worth checking against a mirror return or a medicine cabinet door swing, and it's deeper than a lot of flush vanity sconces.

One 62-1567 puts out 670 lumens, which reads as accent or a small powder-room level rather than full grooming light over a double vanity. For a standard vanity most specs run two or three of these flanking or above the mirror. Color quality is good for a bathroom: 3000K warm white with a CRI of 90, so skin tones and makeup read accurately.

No, it's fixed at 3000K warm white. There is no CCT selector switch on this one. If you're mixing it with existing fixtures in the same room, they need to be 3000K too or the difference will show. For a job where you want field-adjustable color, you need a CCT-selectable fixture.

It carries a cETLus safety listing, which covers both US and Canadian installation, and it's RoHS compliant. Note the California Prop 65 disclosure for lead, which applies to shipments into California.

One configuration only: brushed nickel over a steel body, with a frosted alabaster glass shade. Brushed nickel is the safe match for most standard bath faucet and towel bar packages, so it's a common pick when a property manager is standardizing bathrooms across units.

It's a wall-mounted fixture with a single 5 inch diameter shade, and NUVO shows it in the up orientation. Whether you can flip it depends on the shade mounting, so verify on the first unit before you commit to a run of bathrooms. The fixture is light, 1.25 lbs, so a standard wall box supports it without extra bracing.