NUVO Lighting 62-1601 Caper, LED Vanity, Brushed Brass with Frosted Lens

It carries a damp location rating and is listed for indoor use, so it is fine on a bathroom wall where it sees shower steam. Damp rated is not wet rated, so do not install it inside a shower enclosure or anywhere it takes direct water spray. Safety listing is cETLus, which covers both US and Canadian installs.

Yes, the Caper 62-1601 is listed ADA compliant, which matters because its 3.63 inch extension keeps it inside the 4 inch maximum protrusion allowed for wall-mounted objects in a circulation path. That makes it usable in commercial restrooms, multi-family common areas, and accessible guest baths.

The LED is integrated, so there is no socket and no lamp to replace. It is rated at an average 35,000 hours, which is why NUVO builds it in rather than using a replaceable bulb. For maintenance planning, treat the whole fixture as the replaceable unit. If your facility standard requires field-replaceable lamps, you want a vanity with a G9 or medium base socket instead.

Yes, it is dimmable. Because it is a 13W integrated LED on 120V, you need an LED-compatible (ELV or forward-phase LED) dimmer rather than an old incandescent rotary or slide dimmer, and you should check the dimmer's minimum load since 13W is a very light load for most residential dimmers. Color temperature is fixed, not CCT selectable, so dimming is your only output adjustment.

The Caper 62-1601 puts out 1105 lumens from 13W, roughly what a 75W incandescent gives, which is adequate task light over a single sink when paired with a ceiling fixture. For a primary bath where the mirror is the only light source, most spec writers want 1500 lumens or more, so plan a second fixture or add ceiling light. The frosted lens and 90 CRI matter more than raw output for grooming, since 90 CRI renders skin tone accurately.

Brushed brass is the only finish offered on the 62-1601, paired with a frosted striped-finish shade. Brushed brass reads as a warm satin gold, so it coordinates with brushed or satin brass faucets and cabinet pulls but will not match polished brass or champagne bronze. If you are standardizing a building on one metal, order a sample unit and set it against the plumbing trim first.

The fixture weighs 2.47 lbs with a steel base, so it is light enough for any standard 4 inch round or octagonal wall box without additional bracing. At that weight a single installer can hold it while making up the 120V connections.

It is a wall-mount vanity with a single frosted shade measuring 12.00 x 4.75 x 4.75 inches, and like most LED vanity bars it can be oriented either direction on the wall plate. Running the lens downward throws more light onto the sink and counter; upward gives softer indirect fill off the ceiling. Either way the fixture still projects 3.63 inches from the wall.

Yes. Lead is identified as the Prop 65 chemical of concern on the 62-1601, so the fixture ships with that warning for California. It is also RoHS compliant, which caps restricted substances for the electrical assembly. For public-agency and school procurement, flag the lead disclosure in your submittal package.