NUVO Lighting 62-1777 Blink Pro Plus, 29W, 15in, Surface Mount LED, CCT Selectable, 90 CRI, White Finish, 120/277V, Round Shape

Yes. The 62-1777 is a 120V/277V universal-input fixture, so the same part runs on standard 120V branch circuits and on 277V legs of a 480/277V system. That means one SKU covers both tenant-space and back-of-house circuits, which is why it is usually the one specified for standardizing across a facility.

None above the ceiling. The Blink Pro Plus 62-1777 is a surface mount, ceiling-mounted edge-lit panel measuring 15 inches in diameter and only 1.06 inches high, so it sits flush against the finished surface and needs no plenum depth or recessed can. It works on concrete decks, hard-lid drywall, and anywhere a recessed housing will not fit.

Bathrooms and other damp interior spaces, yes. The 62-1777 carries a damp location rating and is listed for indoor use, so it is fine over a tub surround area, in a shower room ceiling, or a laundry. Do not use it in a covered exterior breezeway or anywhere exposed to direct water or weather; that calls for a wet-location rated fixture.

Color temperature is field selectable on the fixture itself, so there is only one part number to order regardless of the CCT you end up running. That lets a property manager carry a single unit and match it to whatever is already installed in the corridor or unit. It renders at 90 CRI, which is the high-CRI tier you want where finishes, skin tone, or merchandise color matter.

Each 62-1777 delivers 2200 to 2320 lumens at 29 watts, with the exact figure depending on the color temperature you select. For layout purposes figure roughly 2,200 lumens per fixture at 15 inch diameter and space from there. It replaces a two-lamp close-to-ceiling incandescent or CFL drum at a fraction of the load.

The 62-1777 is a dimmable LED fixture. The LED board is integrated, not a replaceable lamp, so dimming is handled through the driver and the control on the wall rather than by swapping bulbs. Pair it with a dimmer rated for LED loads at the voltage you are feeding, 120V or 277V.

No. It is an integrated LED fixture with no socket and no lamp to change, rated 50,000 average hours. When it reaches end of life the whole fixture is swapped. For MRO stocking that means you are buying fixtures, not lamps, and the tradeoff is no relamping labor over the life of the unit.

It carries a cETLus safety listing, which covers both US and Canadian requirements, and the fixture is RoHS compliant. That listing is what most AHJs and spec writers are looking for on a commercial surface mount LED.

The housing is die-cast aluminum, which doubles as the heat sink for the LED board, and the fixture weighs 3.37 lbs. That is well within the load a standard ceiling outlet box will carry, so no extra bracing or fan-rated box is needed for weight alone.

White only, in a round contemporary profile. If you are matching multiple ceilings across a building, every 62-1777 will be the same white round trim, so the openings stay consistent without having to track finish codes.

Yes, lead is the listed Prop 65 chemical for this fixture. If you are shipping to or installing in California, that disclosure needs to travel with the submittal package.