NUVO Lighting 62-1788 Blink Pro Plus, 34W, 19in, Surface Mount LED, CCT Selectable, 90 CRI, Black Finish, 120/277V, Round Shape

Yes. The 62-1788 Blink Pro Plus is a dual-voltage fixture rated 120V/277V, so the same part works on standard 120V branch circuits and on 277V lighting panels common in commercial and multi-family buildings. No separate SKU or step-down transformer is needed.

The 62-1788 is rated for damp locations and listed for indoor use, so a bathroom, laundry room, or covered interior corridor is fine. It is not a wet location fixture, so do not use it where it will be exposed to direct water or weather, such as an open soffit or shower spray zone.

It is a close-to-ceiling, surface mounted round fixture measuring 19 inches in diameter with a height of only 1.06 inches. That flat profile makes it workable in low-ceiling corridors, stairwells, and basement units where a drum or pendant would be in the way. It mounts to the ceiling, not the wall.

It is cETLus listed, which covers both US and Canadian safety requirements, and the fixture is RoHS compliant. That listing is typically what an inspector or institutional spec is looking for on a commercial indoor luminaire.

The fixture is CCT selectable, so the color temperature is chosen at the fixture rather than fixed at the factory. For a property manager standardizing corridors and units, that means one part number covers warm and cool specs across a building instead of stocking several. Light output lands in the 2500 to 2640 lumen range depending on the setting selected.

Dimmable, yes. The light source is an integrated LED, so there is no bulb to change and no socket to match; when the LED module reaches end of life the fixture is replaced. Rated life is 50,000 hours. Pair it with an LED-compatible dimmer rather than an older incandescent-only unit.

At 34 watts the 62-1788 produces 2500 to 2640 lumens from an edge-lit LED panel in a 19 inch round, 1.06 inch deep body. It is a one-for-one swap for an older surface drum on a ceiling box, and because the LED is integrated there is no ballast, lamp, or socket to maintain afterward.

The 62-1788 delivers 90 CRI, which renders color noticeably more accurately than the 80 CRI fixtures typically used in utility spaces. It matters where finishes, paint, artwork, or skin tone are judged, so hotel lobbies, healthcare corridors, retail, and leasing offices are where you feel the difference. In a back-of-house storage room it is not the deciding factor.

The body is die-cast aluminum, which also serves as the heat sink for the LED, and the fixture weighs 4.73 lbs. That weight is well within what a standard ceiling outlet box will support, so no extra bracing is needed for a typical ceiling install.

Yes, lead is the chemical identified under California Prop 65 for this fixture. Institutional and government buyers in California generally need that noted on the submittal package.