NUVO Lighting 62-1920 Blink Performer, 11W LED, 9in Round Fixture, White Finish, 5 CCT Selectable

The 62-1920 Blink Performer carries a Wet location rating, so it holds up in bathrooms, over showers, and in damp laundry or utility rooms. NUVO catalogs it as an indoor fixture, so keep it inside the building envelope rather than on an open exterior soffit. The housing is die-cast aluminum, which is what makes the wet rating hold up over time compared to a stamped steel pan.

Five CCTs are selectable on the fixture itself, so one part number covers a run of rooms where the existing color temperature varies. Set it on site to match what is already up rather than ordering a separate SKU per temperature. CRI is 90, so colors read accurately under it, which matters in bathrooms, kitchens, and unit turnovers where a low-CRI fixture makes finishes look off.

Almost none. The Blink Performer measures 0.67 inch high on a 9 inch diameter round, so it sits nearly flat to the ceiling. That profile is what makes it work in low headroom spots, closets, stair landings, basements, and corridors with ductwork, where a semi-flush drum would be in the way. It is a ceiling-mount fixture only, not rated here for wall use.

Output runs 1050 to 1150 lumens off 11 watts, depending on which of the five color temperatures you select. That covers what a single incandescent-era ceiling fixture used to put out in a hallway, entry, closet, or small bedroom. For a larger room or a kitchen you would want either a bigger diameter fixture or more than one of these on the circuit.

There is no replaceable lamp. The LED and driver are integrated into the fixture, rated at 50,000 average hours. For an MRO or property maintenance program that is the point: no relamping cycle, no bulb inventory, no ladder trip for a burnout for years at a time. When it does reach end of life, the fixture comes down as a unit.

The Blink Performer is cETLus listed, which covers both US and Canadian requirements, and it is RoHS compliant. Note that it carries a California Prop 65 notice for lead, which matters if you are shipping into or specifying for a California project and have disclosure obligations.

A flush mount is the move when you cannot cut the ceiling. The 62-1920 mounts to the existing ceiling outlet box and only projects 0.67 inch, so you get near-recessed appearance without touching insulation, a fire-rated assembly, or joist bays. Recessed cans give you a cleaner ceiling but need a hole, housing depth above the plane, and often an IC-rated can. In concrete-deck buildings, plaster ceilings, or anywhere the ceiling cavity is not accessible, the surface flush mount is the only practical option.

White, and that is the only finish offered on this model. The styling is plain utility with an edge-lit lens, so it reads as a flat white disc rather than a decorative fixture. That is what you want in corridors, back-of-house, storage, garages, and rental unit turnovers where the fixture should disappear into the ceiling.