NUVO Lighting 62-1924 Blink Performer, 11W LED, 9in Square Fixture, White Finish, 5 CCT Selectable

The Blink Performer 9 inch square LED flush mount carries a Wet location rating, so it holds up in a shower ceiling, over a tub, or under a covered exterior soffit where it sees moisture. Note the fixture itself is catalogued for indoor use, so for exterior work keep it under cover rather than fully exposed. It is cETLus safety listed.

It is a 5 CCT selectable fixture, so one SKU covers five white tones set at the fixture. That is what makes it work for a property manager standardizing corridors, baths, and closets across a building: stock one part number and dial each run to match what is already up. CRI is 90, so colors render close to what the existing lamps show if those are also high-CRI.

The fixture is dimmable and runs on 120V line voltage at 11 watts. At that load most standard incandescent dimmers are well below their minimum, so use an LED-rated dimmer for smooth low-end control. There is no separate driver box to mount; the LED and driver are integrated.

Almost none. The fixture measures 9 by 9 inches with a height of 0.67 inch, so it sits essentially flat to the ceiling. That low profile is why it gets used in low-headroom spots, stair landings, closets, and laundry rooms where a semi-flush drum would be in the way.

There is no replaceable lamp. The LED is integrated, no socket and no bulb to stock, and the array is rated for 50,000 average hours. For an MRO buyer that means no relamping line item, but a failed unit is a fixture swap rather than a bulb change.

At 1050 to 1100 lumens from 11 watts, the Blink Performer covers a typical bathroom, hall, entry, or walk-in closet as a single ceiling source. For larger rooms, plan on multiple units on a grid rather than one fixture carrying the whole space. Exact output shifts slightly with which of the five color temperatures you select.

The base is die-cast aluminum, which also serves as the heat sink for the LED. The whole fixture weighs 1.59 lbs, light enough to land on a standard ceiling junction box without added bracing.

It is a ceiling-mount close-to-ceiling fixture using an edge-lit LED panel, which is what allows the 0.67 inch depth and gives an even face rather than visible diodes. Finish is white, the only finish this model is built in.

Yes. Lead is the listed Prop 65 chemical for this fixture, which matters if you are shipping to a California jobsite and need the warning on the submittal. The product is also RoHS compliant.