NUVO Lighting 62-723 Bond, Single 19-1/2in, LED Vanity

The Bond 62-723 is a single-shade wall fixture measuring 19.5 inches in the height dimension and 6 inches in the width dimension, with a 4 inch extension from the wall. Those proportions make it a sconce-style vanity light intended to hang vertically alongside a mirror, and its single shade means you would typically use a pair, one on each side, rather than one unit spanning the mirror. It wall mounts only.

It carries a damp location rating and is listed for indoor use, so it is fine for a normal bathroom where it will see steam and humidity. Damp rated does not cover direct water contact, so it should not go inside a shower or tub enclosure where it can be sprayed. Safety listing is cETLus.

The LED is integrated, so there is no socket and no lamp to change. It is rated at 30,000 average hours, which for a bathroom running a few hours a day is many years of service. When the LED eventually fails you replace the fixture, not a bulb. Plan for that if you are standardizing across a property.

Yes, it is listed as ADA compliant, and the 4 inch extension keeps it inside the projection limit that governs wall-mounted objects in circulation paths. That makes it usable in hospitality, healthcare, and multi-family restrooms where protruding-object rules apply.

Yes, the fixture is dimmable and runs on 120V line voltage at 13W. Because it is an integrated LED driver rather than a bulb, use a dimmer rated for LED loads; a legacy incandescent dimmer with a high minimum load can flicker or buzz on a 13W fixture.

Each fixture puts out 1040 lumens at 13W with a 90+ CRI, which is high enough color rendering for grooming and makeup tasks. One unit alone is light for a full vanity; a pair flanking the mirror gives roughly 2080 lumens and even cross lighting on the face, which is why single-shade vanities like this are usually specified in twos.

Color temperature is fixed; the Bond 62-723 is not CCT selectable, so there is no field switch to change between warm and cool white. Finish is Polished Nickel with a white shade. If you need selectable CCT for a multi-unit spec where different rooms want different light, this is not the fixture for it.

The body is steel and the fixture weighs 3.69 lbs, so a standard wall box with a mounting strap carries it without blocking or anchors. Light enough for a single installer to hold and terminate at the box.

Yes. Lead is the listed California Prop 65 chemical for this fixture. It is also RoHS compliant. Buyers shipping into California should carry the warning through on their own documentation.