NUVO Lighting 65-1010 LED Linear High-Bay With Interchangeable Lens, 65W/75W/85W Wattage Selectable, 3K/4K/5K CCT Selectable

One fixture covers the range. The 65-1010 accepts 120V through 277V, so the same unit works on 120, 208, 240 or 277 volt branch circuits. That matters for MRO buyers standardizing a warehouse or shop across mixed panels: you stock one part number instead of voltage-specific SKUs.

Both are field selectable on the fixture itself. Wattage switches between 65W, 75W and 85W, and CCT switches between 3000K, 4000K and 5000K. Output tracks the wattage setting across a 9,474 to 12,739 lumen range, so 65W gives you the low end and 85W the high end. Practical effect: you can carry one fixture and tune it per bay instead of ordering separate output and color versions.

A 41 inch suspension kit ships with the fixture. Beyond that it can be surface mounted with a bracket, or hung on cables or chain, so it drops onto a deck, a bar joist, or an existing chain hang. If you need a drop longer than 41 inches you will need additional chain or cable, and threaded rod or a J-box for surface work is still a field item.

Damp location rated, so covered and unconditioned spaces are fine: warehouses, garages, covered docks, canopies. It is not wet location rated, so do not install it where it takes direct rain or hose spray. For fully exposed outdoor work, choose a wet location rated fixture instead.

It is much more compact than a 4-foot fluorescent strip: 14.17 inches long, 11.02 inches wide and 1.77 inches deep, at 5.07 lbs. That low weight means a single hang point per cable and no reinforcing on most joists or decks. Note it will not cover the full footprint of a 4-foot or 8-foot fluorescent housing, so plan for patching or a different spacing layout rather than a one-for-one drop-in.

The fixture is dimmable, which is what lets it work on a control scheme rather than just line switching. The LED board is integrated, so dimming is handled by the fixture driver and a compatible control, not by swapping lamps.

Yes, the lens is interchangeable on the 65-1010. That is the point of the design: you keep one housing and change the lens to suit the bay, narrower distribution for tall racking aisles, wider for open floor. The LED source itself is integrated and not replaceable.

It carries a cULus certification, which covers both US and Canadian installation, and it is RoHS compliant. Inspectors on commercial and institutional jobs generally want that listing mark on the fixture label before they sign off.

The body is die-cast aluminum, which is the heat sink for the LED board as well as the structure. Aluminum housings shed driver and board heat better than sheet steel enclosures, which is what supports the 50,000 hour rated life at ceiling-level ambient temperatures.

80 CRI is the normal target for industrial and warehouse lighting, and that is what the 65-1010 delivers. Combined with the 5000K setting it reads clean and neutral for picking, assembly and general shop work. If you have a color-critical task such as paint matching or print inspection, you want a higher CRI fixture instead.

Yes. The fixture carries a California Proposition 65 disclosure for lead. For California institutional and public-sector buyers, that means the notice needs to pass through on the submittal and any facility posting requirement your agency follows.