NUVO Lighting 65-1011 LED Linear High-Bay With Interchangeable Lens, 110W/130W/155W Wattage Selectable, 3K/4K/5K CCT Selectable

The 65-1011 carries a damp location rating, so it is fine in unheated warehouses, covered loading docks, parking structures and similar sheltered humid spaces. It is not a wet location fixture, so keep it out of direct rain or anywhere it can be hosed down. The housing is die-cast aluminum and the fixture is cULus certified.

Yes. The 65-1011 accepts 120V through 277V, so the same fixture works on 120V single phase in a small shop and on 277V off a 480/277 three-phase panel in a commercial building. No separate voltage version to specify.

Both are selectable on the fixture itself: 110W, 130W or 155W, and 3000K, 4000K or 5000K. Output tracks the wattage you pick, from 15,655 to 21,714 lumens, at 80 CRI. One part number covers all nine combinations, which is why it works well for stocking a single SKU across different bay heights and spaces.

A 41 inch suspension kit ships with the fixture. It can be surface mounted with a bracket or hung on cables or chain, so for a typical drop from a deck you have what you need in the box. For a drop longer than 41 inches you will need additional chain, cable or aircraft cable of your own. The fixture weighs 5.07 lbs, so the structural demand on the attachment point is light.

The 65-1011 is dimmable. The LEDs are integrated into the fixture, so there is no lamp or driver to swap for a dimming version. Confirm the dimming protocol your control system uses before you commit a large rollout.

No. The LED array in the 65-1011 is integrated, with no lamp base and no replaceable bulb, so when the light engine reaches end of life the fixture is replaced rather than relamped. Rated life is 50,000 hours.

The fixture measures 14.17 inches long, 11.02 inches wide and 1.77 inches deep, so it is a compact pad-style high-bay rather than a long strip. Add the 41 inch suspension kit and the lens sits roughly three and a half feet below the attachment point when hung at full length; surface mounting with the bracket keeps it tight to the deck where headroom is limited.

The lens on the 65-1011 swaps out, which lets you change the beam distribution without changing fixtures. That matters when the same fixture type goes over narrow aisle racking in one area and over open floor in another: wide spread for open space, tighter distribution for tall aisles. Light output is unchanged at 15,655 to 21,714 lumens depending on the wattage setting.

At 80 CRI with a 3000K setting available, it can work over retail floor and shop areas, not just storage. For color-critical retail display you would want a higher CRI fixture. In a warehouse or manufacturing bay, run 4000K or 5000K at 130W or 155W for the brighter, cooler light crews usually prefer.

Yes, lead is the listed Prop 65 chemical for the 65-1011. The fixture is also RoHS compliant. Institutional and government buyers who need the disclosure on file should note the lead listing.

White is the finish offered on the 65-1011, over a die-cast aluminum housing. Order under part number 65-1011.