NUVO Lighting 65-627R1 LED Canopy Fixture, 55W, CCT Selectable, White Finish

Yes. The 65-627R1 LED canopy fixture accepts 120V through 277V on the same driver, so it drops onto a 120V residential-style circuit or a 277V commercial lighting circuit without changing the fixture. That makes it workable for parking garages, gas station canopies, and multi-family breezeways where the panel voltage varies by building.

It is rated for outdoor use and carries a Wet location rating, so it can be mounted where it takes direct rain and splash, not just under a sheltered soffit. The housing is die-cast aluminum and the fixture is cULus safety listed.

It is CCT selectable, set at the fixture rather than ordered as a fixed color. Output shifts slightly with the setting: 7733, 8284, and 8072 lumens across the three positions, all at 55 watts with 80 CRI. For a property manager standardizing a site, that means one part number covers every canopy and you match the existing color on site instead of stocking three SKUs.

It is a surface mount canopy with ceiling pendant mounting, and it measures 10.04 inches in diameter by 3.15 inches high. That 10-inch round footprint covers a standard 4 inch octagon or round ceiling box opening. Fixture weight is 4.41 lbs, light enough for a standard box-supported install.

The fixture is dimmable, so it can be tied into a dimming control scheme. The LED is integrated, not a replaceable lamp, so all dimming happens through the fixture driver rather than by swapping bulbs.

No separate lamp to order. The LED is integrated into the fixture and rated for an average 50,000 hours, so there is no socket, no relamping, and no bulb line item on the order. When the LED reaches end of life, the fixture is replaced.

At roughly 7,700 to 8,300 lumens depending on the color temperature setting, the 65-627R1 lands in the range typically used for garage and fuel canopy bays, drawing 55 watts to do it. If your existing fixture is a 175W metal halide, this is the usual LED swap point; for higher-mounted or higher-output positions you would step up to a larger canopy or a low-bay.

White is the only finish offered on the 65-627R1. The body is die-cast aluminum finished white, which is what you want on a canopy underside since it reflects rather than absorbs light.

Yes. The 65-627R1 carries a California Proposition 65 warning for lead. It is also RoHS compliant. Institutional and government buyers who need the Prop 65 disclosure on file should note it before it ships to a California site.