NUVO Lighting 65-841 LED Area Light Type III, 100W, Bronze Finish, 5000K, 120-277V

Yes. The 65-841 ships with a 2-3/8 inch slip-fitter mount, so it slides directly onto a standard 2-3/8 inch round or square pole tenon or a bullhorn arm of that size. No separate adapter is needed for that tenon size. If your pole has a drill-pattern arm mount instead of a tenon, the slip-fitter is the wrong interface and you would need a tenon adapter on the pole.

The 65-841 is a universal-voltage fixture, accepting anything from 120V through 277V. That covers 120, 208, 240 and 277 volt circuits, so the same fixture works on single-phase residential feeds and on 277V commercial lighting branch circuits without ordering a different part number. It is not a 480V fixture.

It carries a Wet location rating and is cULus certified, so it can be mounted in the open on a pole or bullhorn with direct rain exposure. Housing is die-cast aluminum. It is an outdoor fixture, not a damp-location-only unit.

At 13,793 lumens from 100 watts, the 65-841 is the output a site would normally get from a mid-size metal halide or high pressure sodium shoebox. Compare it on delivered lumens rather than wattage: match the 13,793 lumen figure against your existing fixture's output and the mounting height, and the Type III distribution handles the same roadway-edge and parking-aisle layout.

Type III throws light forward and to the sides in an asymmetric pattern, which is what you want for pole lights set along the edge of a parking lot, a driveway, or a roadway shoulder, where the pole sits on the perimeter and the light has to reach out over the paving. If the pole sits in the middle of an area and you need light thrown in both directions, a Type V (square/round symmetric) or Type II is the better layout. The 65-841 is the Type III version.

The 65-841 is dimmable, so it can be tied into a 0-10V style dimming control for late-night setback on a parking lot. The LEDs are integrated, so there is no lamp to swap and no ballast or driver socket to match.

The 65-841 is fixed at 5000K, a cool daylight white with 80 CRI. It is not a CCT-selectable fixture, so you cannot field-switch it to 4000K or 3000K to blend with warmer heads. If the rest of your site is 4000K, the color difference will be visible across the lot.

The head weighs 7.88 lbs and measures 20.71 x 12.40 x 3.11 inches. That weight and the projected area matter when you are checking EPA loading on an existing pole, especially if you are hanging two or four heads on a tenon cluster.

Rated life on the 65-841 is 50,000 hours. On a dusk-to-dawn schedule of roughly 4,000 hours a year that is over a decade of service, and because the LEDs are integrated there is no relamping interval in between: the fixture runs until the head is replaced. That is the maintenance case property managers use to justify swapping HID heads out.

Bronze is the finish offered on the 65-841, which is the standard dark bronze look most parking lot poles and bullhorn arms are ordered in. There is no white or black option under this part number.

It is RoHS compliant. It also carries a California Prop 65 notice for lead, which is a labeling requirement for the product and matters if you are supplying into a California job with disclosure obligations.