NUVO Lighting SF76-522 2 Light, 10in, Flood Light, Exterior, PAR38 with Adjustable Swivel, White Finish

Yes. The SF76-522 twin flood is carries a Wet location rating and is cULus safety listed, so it can go on an exposed wall without a hood or soffit over it. Housing is die-cast aluminum with glass lens. It is a wall-mount fixture only.

Bulbs are not included. It takes two PAR38 lamps with an E26 medium screw base on 120V, rated to 150W total for the fixture. Most crews order LED PAR38s to stay well under that load; the fixture itself is halogen-technology rated.

It projects 5 inches off the wall and stands 4.75 inches high on a 10 inch diameter backplate. The 10 inch round plate covers a standard 4 inch round or octagonal weatherproof box easily. Fixture weight is 1.73 lbs, light enough that the box's own fixture studs carry it.

No. The SF76-522 is not ADA compliant, and with a 5 inch projection it exceeds the 4 inch limit for objects mounted in the 27 to 80 inch zone on an accessible route. Mount it above 80 inches or use an ADA-compliant fixture where protrusion rules apply. It is RoHS compliant, and the Prop 65 chemical listed is lead.

Dimming is lamp dependent on the SF76-522. The fixture is a straight 120V lampholder assembly with no driver, so whether it dims comes down to the PAR38 lamps you install and the dimmer they are rated for. Put non-dimmable LED PAR38s in it and it will not dim.

Yes. Each of the two PAR38 holders sits on an adjustable swivel, so you can split coverage, one head down a driveway and one across a walk, or stack both on the same area. That is what makes it useful for parking-lot corners and building perimeters where one aiming angle is not enough.

The SF76-522 is a plain wet-rated twin flood with no sensor or photocell built in. Switching has to come from elsewhere, a wall switch, timer, photocell, or a sensor upstream on the circuit. If you want the sensor in the fixture, pick a different model; if the building already runs its exterior lighting off a photocell or lighting contactor, this one drops right in.

White is the only finish offered on the SF76-522, ordered as MPN SF76/522. It is a traditional-style die-cast housing, so on a bronze or black building you would need a different NUVO model number rather than a finish option on this one.

No, there is no CCT select switch on this fixture. Color temperature is whatever the two PAR38 lamps you install are, so if you are standardizing a property on 4000K, specify the lamps, not the fixture. Lamps are sold separately.