NUVO Lighting SF76-636 Pagoda Garden Fixture, Large 10in Hood, 1-Light, 3 Louver, Green Finish

The SF76-636 Pagoda fixture mounts on a pole or post and ships without a lamp. It takes one E26 medium base A19 bulb, 100W maximum, on 120V. Plan on buying the lamp separately, and note dimming depends entirely on the bulb you choose, not the fixture.

Wet location rated and cULus safety listed, so the SF76-636 is fine in direct rain, sprinkler spray, and open landscape beds. It is built from die-cast aluminum and glass for outdoor service.

The socket is an E26 medium base sized for an A19 lamp at up to 100W, so any A19 LED or CFL with a medium base and a wet-location or enclosed-fixture rating drops in. The fixture itself is an incandescent-technology housing with no onboard driver and no selectable color temperature, so whatever CCT and dimming behavior you want comes from the lamp.

The fixture comes with an 18 inch lead. If your post junction or splice point sits farther down the stem than that, run your splice up to the head or add an in-post junction within 18 inches of the fixture, using a wet-location rated connection on 120V.

Order by the manufacturer part number SF76-636. It is the large 10 inch hood Pagoda head, single lamp, three louver, in the green finish, and that is the only finish this head is built in, so every post on the property will match. Each head is one fixture only, so count one per post and add lamps and posts separately.

Yes. The SF76-636 is listed with lead as a Prop 65 chemical, which matters for institutional and government purchasers who have to document it. The fixture is also RoHS compliant.