NUVO Lighting SF76-637 Pagoda Garden Fixture, Large 10in Hood, 1-Light, 3 Louver, Old Bronze Finish

The SF76-637 Pagoda fixture is a post/pole mount head, not a stake-mount path light. It needs a post or pole to land on, and it ships with an 18 inch wire lead to make up to the supply inside the post. Budget for the post and any ground sleeve separately, since neither comes with the fixture head.

Yes, it carries a Wet location rating and is an outdoor fixture, so direct rain and irrigation spray are acceptable. Safety listing is cULus, which covers both US and Canadian installs.

No lamp is included. It takes one A19 bulb with an E26 medium base, 120V, rated up to 100W maximum. An LED A19 in a medium base works fine as long as it is wet-location rated for an enclosed outdoor fixture.

No. It is a 120V line voltage fixture and must be fed from a line voltage branch circuit. On a 12V transformer run you need a dedicated low voltage path or garden fixture instead.

It is the large hood version: 9.63 inches in diameter and 8.63 inches high, with a 3 louver traditional pagoda profile in Old Bronze. That diameter reads noticeably wider than typical small garden heads, so if you are matching a run of existing lights, measure the hood you already have before mixing sizes. Fixture weight is 2.96 lbs, light enough for a standard garden post.

Construction is die-cast aluminum with glass. Die-cast aluminum does not rust the way steel does, which is why it is the usual choice for landscape heads on multi-family and commercial grounds. The painted Old Bronze finish is the wear point in salt air or under sprinkler mineral spray, so expect finish fade before structural failure.

Old Bronze is the only finish for the SF76-637, ordered as MPN SF76/637. If you need another finish to match existing fixtures on the property, you are looking at a different model number in the Pagoda garden family.

Yes. Lead is identified as a Prop 65 chemical for this fixture, which matters if you are specifying for California public or institutional work and have to pass disclosure through to the owner. The fixture is RoHS compliant.