NUVO Lighting SF77-137 1-Light, 8in, Utility, Wall Mount, With White Glass Cylinder, Black Finish

Yes. The SF77-137 is an outdoor fixture with a Wet location rating, so it can go on an open wall, a stair landing, or a loading dock face where rain hits it directly. It carries a cULus safety listing, which is what most facility and inspection paperwork wants to see on an exterior fixture.

It takes one standard medium base (E26) lamp in an A19 shape, rated up to 100W at 120V. No bulb ships with the fixture, so order lamps separately. If you want LED, any A19 medium base LED under the 100W rating drops right in, and dimming depends entirely on the lamp you choose since the fixture itself has no dimming electronics.

Extension off the wall is 6 inches, with an overall height of 8 inches and a 4.75 inch diameter. That 6 inch projection is the number that matters in a corridor, stairwell, or doorway approach, since the fixture is not ADA compliant and a wall mounted object protruding more than 4 inches into a circulation path is a problem in ADA governed areas. On an exterior building face, a service door, or a dock wall, the projection is a non-issue.

No. This fixture is 120V only. On a commercial 277V lighting branch, either pull a 120V circuit to the location or specify a 277V rated exterior fixture instead. Wiring a 120V socket fixture to 277V destroys the lamp immediately and is a code violation.

It is an incandescent technology fixture, meaning the socket is open and you supply the lamp, not an integrated LED module. That is an advantage for an MRO stock room: when the lamp fails, a maintenance tech swaps a bulb instead of replacing the whole fixture, and you can move to LED A19 lamps later without touching the housing.

The housing is aluminum with a glass cylinder shade, so there is no ferrous body to rust through, and the fixture is wet rated for direct weather exposure. It weighs 2.46 lbs, light enough that a standard weatherproof round box with a mounting strap carries it without extra bracing.

One finish only, black, with a white glass cylinder shade around a single lamp. The look is plain utility, a black wall mount with a straight white cylinder, which is what you want on service entrances, back-of-house doors, garages, and equipment rooms where fixtures should match each other and not draw attention. Because there is a single finish and a single configuration, standardizing a building or a portfolio on it is straightforward, order the same part number every time.

NUVO Lighting SF77-137, also written SF77/137 in NUVO's own catalog format. Same fixture, the slash and the dash are interchangeable in NUVO part numbering. Specify that number when you want the 8 inch black wall mount with a single white glass cylinder shade.

Wall mount only. There is no post-top fitter or pendant provision on the SF77-137, and with a 6 inch extension off the mounting surface the fixture is built to throw light out from a vertical face. For a post or a ceiling application, specify a fixture designed for that mounting method rather than adapting this one.

Yes, the SF77-137 is flagged for lead under California Proposition 65. That matters if you are a distributor reselling into California or a procurement group with compliance documentation requirements, the warning has to follow the product. The fixture is also RoHS compliant.

The fixture is rated to 100W maximum at 120V, so you can run a full 100W incandescent or, more practically, a 100W equivalent LED A19 that draws around 15W. Output is entirely a function of the lamp you install, since no bulb is included. The white glass cylinder diffuses the source rather than aiming it, so expect general area light around the door, not a directional flood on a driveway.