NUVO Lighting SF77-140 1-Light, 8in, Utility, Wall Mount, With White Glass Globe, Black Finish

Yes. The SF77-140 is an outdoor fixture with a Wet location rating, so it can go on an unprotected exterior wall where it takes direct rain. It is cULus safety listed.

Bulbs are not included. You need one medium (E26) base lamp, A19 shape, at up to 100W maximum, on a 120V circuit. The fixture itself is incandescent technology, so an A19 LED or CFL replacement lamp with an E26 base will also thread in as long as you stay at or under the 100W rating.

Extension off the wall is 7 inches, with a 6 inch globe diameter and 7.25 inch overall height. On a tight walkway, door swing, or stairwell landing, check that 7 inch projection before you commit, and note it is not an ADA compliant fixture.

No. The SF77-140 is not ADA compliant, and its 7 inch wall extension exceeds the 4 inch protrusion limit ADA allows for objects mounted between 27 and 80 inches above the floor. For a protected egress corridor or a public accessible route, specify an ADA-rated wall pack or sconce instead.

Dimming is lamp dependent on this fixture. There is no driver in it, so whether it dims comes down to the A19 lamp you install. An incandescent A19 dims on a standard incandescent dimmer; an LED A19 only dims if that lamp is marked dimmable and matched to the dimmer.

The housing is aluminum with a white glass globe, finished in black. Aluminum does not rust the way steel does, which is why it is the common choice for exterior service and utility lighting. The fixture weighs 1.73 lbs, so it is light enough to land on a standard outdoor wall box without extra bracing.

That is exactly what this is. Utility style, one lamp, wall mount, white glass globe over a black aluminum body. It is a single-lamp enclosed globe, so it is for general service light at a door, stair, or equipment area, not for area or parking lot coverage. If you are lighting a loading area or a building perimeter, a wall pack with a wider distribution is the better call.

Black is the only finish offered on the SF77-140, paired with the white glass globe. If you are standardizing finishes across a building's exterior doors, order the same model number for every opening and they will match.

The SF77-140 is RoHS compliant and carries a California Prop 65 notice for lead. It is cULus safety listed. Those are the compliance marks on record for the fixture.

No. There is no CCT selectable switch on this fixture because there is no integrated LED in it. Color temperature is set entirely by whichever E26 A19 lamp you install, so pick the lamp's Kelvin rating to match the rest of your building.