NUVO Lighting TH202 1-Light, R30, Track Head, Straight Cylinder, White Finish

The TH202 track head takes a single R30 reflector lamp with an E26 medium screw base, rated up to 75W at 120V. No lamp is included, so order lamps separately. Dimming depends entirely on the lamp you put in it, not on the head.

No. The TH202 is an indoor fixture with a dry location rating only, so it should not go in a damp or wet spot such as a covered walkway, a canopy, or directly over a tub or shower. Keep it to conditioned interior spaces like retail floors, offices, and residential ceilings.

Just the head. The TH202 is a single-light straight cylinder track head that mounts to an existing ceiling track run, so you supply the track section, power feed, and end caps separately. Lamps are not included either. One head carries one R30 lamp.

The head is an incandescent-technology fixture rated to 75W maximum on a 120V circuit, with an E26 medium socket. Any R30-shape lamp with a medium base that draws 75W or less will physically fit and seat, which includes LED R30 retrofits. Whether it dims is determined by the lamp and your dimmer, since the head itself is lamp dependent for dimming.

The TH202 carries a cETLus safety listing, which covers both US and Canadian requirements, and it is RoHS compliant. That listing is what most building inspectors and tenant-improvement specs want to see on a track head. It is a dry location, indoor-only fixture, so it suits sales floors, offices, and galleries.

Each head weighs 0.98 lbs, so mechanical weight on the track is negligible even with a long run of them. The limit you actually have to watch is electrical: at 75W per head on a 120V circuit, plan your head count against the amperage of the circuit and the rating of the track and feed you are using.

White finish, built from glass and metal, in a straight cylinder transitional shape. The white body reads flat against a white ceiling and white track, which is what most property managers want when they are adding heads to an existing run rather than making a design statement.

NUVO publishes both. Installation instructions are at assets.satco.com under the TH202 product folder, and the full spec sheet is at media.satco.com/specsheets/pdf/TH202.pdf. Worth pulling the spec sheet before you order if you are matching heads to an existing track system.

Yes. Lead is identified as a CA Prop 65 chemical for the TH202, so California jobs need the standard warning passed along with the fixture. It remains RoHS compliant.

No, there is no CCT selector on the head. Color temperature is entirely a function of the R30 lamp you install, so if you are standardizing color across a store or lobby, buy all your R30 lamps at the same Kelvin rating.