NUVO Lighting TH474 1-Light, LED, 12W Track Head, Small Cylinder, Matte Black, 36 degree Beam

No. The TH474 cylinder track head is rated for dry locations and indoor use only, so keep it out of damp or wet areas like covered patios, bathrooms over the tub, or exterior soffits. For those spots you need a fixture with a damp or wet location rating.

The TH474 runs on 120V line voltage and is dimmable, so it suits a standard 120V track circuit on a dimmer. It is a ceiling-mounted track head drawing 12W and putting out 1020 lumens, so a dimmer sized for low-wattage LED loads is the right pairing.

Extension is 5.375 inches from the mounting point, and the head itself measures 3.37 inches long by 2.25 wide by 2.25 high. It weighs 0.44 lbs, so loading a run of them on a single track is not a structural concern. Use the 5-3/8 inch extension when you are checking clearance under low soffits or in front of merchandise displays.

A 36 degree beam is a flood spread, good for washing merchandise shelving, artwork groupings, and general accent coverage rather than pinpointing a single object. Paired with a CRI of 90, colors and finishes render accurately, which is what matters in galleries, showrooms, and apparel retail. If you need a tight punch on one item, look for a narrower spot head instead.

It carries a cETLus safety listing, which covers both US and Canadian requirements, and the fixture is RoHS compliant. That combination is typically what a spec or facilities reviewer is looking for on a commercial indoor job.

No. The TH474 is not CCT selectable, so there is no field switch to shift between 2700K, 3000K, and so on. If you are matching existing heads across a space, order the same model throughout rather than counting on field adjustment.

Construction is aluminum and steel with a matte black finish, in a small cylinder shape. Metal housing rather than plastic is the reason these hold up to repeated aiming in retail and hospitality spaces where staff reposition heads as displays change.

Yes. Lead is listed as a Prop 65 chemical for this track head, which is standard disclosure on many metal-housing electrical fixtures. Facilities buyers in California should note it for their documentation.