NUVO Lighting TK403 Track Lighting Kit, 12W LED, 3000K, 4 foot Track, 36 degree, Round shape, White finish

The TK403 kit ships complete for a single run: one TR120 4-foot track section, one TP154 floating power feed, three TH403 track heads, and all required mounting hardware. The heads use integrated LED, so there are no lamps to buy. You supply only the 120V branch circuit and whatever ceiling anchors your substrate demands beyond the included hardware.

No. The TK403 is rated for indoor, dry locations only, so keep it out of covered patios, canopies, and shower or tub zones. For a bath, it can go over a dry area of the room but not where it will see moisture. A damp- or wet-location fixture is the right call for those spots.

The TK403 is fixed at 3000K warm white, with no CCT selector switch, so it cannot be field-adjusted to 2700K or 4000K. If your other fixtures are 3500K or 4000K, it will read noticeably warmer side by side. CRI is 90, which renders merchandise, paint, and skin tones accurately, so it mixes well with other 90+ CRI fixtures at the same temperature.

Yes. The kit includes a TP154 floating power feed rather than a fixed end feed, so power can be brought in at a point along the 4-foot TR120 track section instead of only at the end. That matters when your existing ceiling box is not located at the end of the run you want.

3060 lumens total across three heads, so roughly 1020 lumens per head, delivered in a 36 degree beam. That tight a beam concentrates the output, which suits accent and display work, artwork, and counter lighting. It is accent light, not general ambient light. For a whole kitchen or sales floor you would run multiple kits or supplement with a wider-beam or recessed layer.

Ceiling mount only, using the included hardware; this is not a pendant or wall-mount kit. Extension is 7.13 inches, which is how far the assembly projects from the ceiling plane, so allow that clearance under a low soffit or in a space with a height restriction. Each head measures 2.25 by 3.25 by 3.25 inches.

The TK403 carries a cETLus safety listing, recognized in both the US and Canada, and is RoHS compliant. Rated average life on the LED heads is 30,000 hours. At 12 hours a day that is roughly 6.8 years of service, which is the figure facility and MRO buyers use for relamp budgeting. Note the Prop 65 disclosure for lead.

The heads are TH403 track heads and the track is a TR120 section, so the components are separately identified and a head pulls off the track without touching the run. Because the LED is integrated into the head, there is no lamp to swap; a failed head is replaced as a whole head.

Base material is steel in a white finish, not plastic, so the heads take repeated aiming and cleaning better than a molded housing. White is the only finish offered on the TK403. For a fleet of units, that single finish makes standardizing simple, and the shipping weight of the complete kit is 17.58 lbs.