NUVO Lighting TK407 Track Lighting Kit, 12W LED, 3000K, 4 foot Track, 36 degree, Round shape, Brushed Nickel finish

Everything for a working run ships in the box: one TR127 4 foot track section, one TP155 floating power feed, three TH407 track heads, and all required mounting hardware. The heads are integrated LED, so there are no lamps to buy. The only thing you supply is the 120V branch circuit and a ceiling junction box connection.

No. The TK407 is an indoor fixture with a dry location rating only, so damp or wet spots like a shower area, a covered exterior porch, or a space that takes condensation are out. Keep it to conditioned interior ceilings such as retail floors, offices, kitchens, and corridors.

It's dimmable, and the complete three head assembly draws 36W at 120V. That's a very light load, so the practical issue is the dimmer, not the circuit: an LED load of 36W sits well below the minimum load some older incandescent dimmers need to run smoothly. Pair it with a dimmer rated for LED loads.

3060 lumens total from the three heads at 3000K, a warm white. Color temperature is fixed, not field selectable, so if you're matching other fixtures in the space they need to be 3000K too. CRI is 90, which is high enough for retail merchandise, artwork, and food display where color accuracy is judged by eye. The 36 degree beam is a narrow flood, better for accenting a wall, shelving, or a display than for washing a whole room.

No. The kit uses a TP155 floating power feed, which lets you make the electrical connection anywhere along the 4 foot track run rather than forcing the feed to land at one end. That matters on a retrofit where the existing ceiling box is not where you want the track to start. The kit is ceiling mounted, and mounting hardware is included.

Extension is 7.13 inches from the ceiling, and each head measures 2.25 by 3.25 by 3.25 inches. Worth checking against low ceilings, door swings, and any overhead clearance requirement in a corridor or behind a counter.

The heads are integrated LED with no replaceable lamp, so there is nothing to relamp. Rated life is 30,000 hours, which at roughly 12 hours a day of commercial operation is on the order of seven years before the head itself is replaced. For an MRO department that means no lamp stocking, but it does mean planning head replacement rather than a bulb change.

It carries a cETLus safety listing, which covers both US and Canadian requirements, and the kit is RoHS compliant. Note the California Prop 65 disclosure for lead, which matters if you are shipping into or specifying for a California facility.

The kit is built around one 4 foot TR127 track loaded with three TH407 heads. Extending a run means adding track sections, connectors, and additional heads as separate items; the kit itself ships complete for a single 4 foot section and nothing more. For a long gallery or retail wall, plan the total footage first and buy track by the piece.

Brushed nickel only, on a stainless steel base, in a contemporary round head shape. If the other fixtures in the space are black or white, this kit will not match them.