NUVO Lighting TK414 Track Lighting Kit, 12W LED, 3000K, 4 foot Track, 36 degree, Pinch back, Black finish

Everything for a complete run ships together: one TR121 4-foot track section, one TP155 floating power feed, three TH414 track heads, and all required mounting hardware. The heads use integrated LED, so there are no lamps to buy either. The only thing you supply is the 120V branch circuit and the ceiling anchors suited to your substrate.

No. The TK414 is rated for dry locations and indoor use only, so a covered exterior porch, an unconditioned garage bay, or a shower area is out. For a damp or wet spot you need a fixture carrying a damp or wet location listing. Dry-rated interior retail, office, gallery, and residential ceilings are the intended use.

It ships with the TP155 floating power feed, which lets you land the supply at the junction box wherever it falls along the track rather than forcing the connection to the end of the run. That is the practical difference on a retrofit: you can center the 4-foot track where you want the light and still reach an existing ceiling box. Mounting is ceiling only.

3,060 lumens total from the three heads, at 3000K warm white with a 90 CRI. Total draw is 36 watts, so roughly 12 watts per head. The 90 CRI matters if you are lighting retail merchandise, artwork, or a display case where color accuracy shows; it is well above the 80 CRI typical of budget track heads.

The kit is dimmable and runs on 120V line voltage. Because the drivers are integrated in the heads, use a dimmer rated for LED loads; older incandescent-only dimmers on a 36 watt total load often sit below the dimmer's minimum load and cause flicker or drop-out. There is no color tuning, the output is fixed 3000K.

Extension is 5.5 inches from the ceiling, and each head measures 3.63 by 2.88 by 2.88 inches. The beam is a 36 degree spread, which is a general flood, good for washing shelving or seating areas rather than a tight accent spot. If you need a narrow punch on a single object, a spot-beam head is the better choice.

It carries a cETLus safety listing, covering both US and Canadian requirements, and it is RoHS compliant. Worth noting for a California job: the kit carries a Prop 65 notice for lead.

Black is the only finish offered on this kit, with the pinch-back head style. If your existing runs are white or brushed nickel, this will not blend. The track section is a TR121, so if you are extending an existing NUVO run, the added track and connectors need to be from the same track system for the heads to seat.

Shipping weight is 18.64 lbs for the boxed kit. The installed load on the ceiling is a good deal lighter than that, but plan anchors for a 4-foot track carrying three heads rather than driving into drywall alone. Follow the NUVO installation instructions supplied with the kit for the mounting hardware provided.