NUVO Lighting TP150 X Connector, White X Joiner, Traditional Style, White Finish

The TP150 is an X joiner: it ties four sections of track together in a four-way cross at one point, so a run can branch left, right, and straight through from a single junction. It is a single circuit connector, so all four legs sit on the same circuit and switch together. If you need independent switching of separate legs, an X connector on a single circuit track won't give you that.

Yes. The TP150 is rated 120V and is a single circuit connector, which is the standard line voltage residential and light commercial track system. It is not for two circuit or low voltage track.

No. The TP150 carries a Dry location rating only, so it belongs in conditioned interior spaces. Damp or wet areas, covered exterior soffits, and anywhere subject to condensation or grease need a fixture and connector rated for those conditions.

Plan for the connector's 6 inch extension at the joint, with a body 1.25 inches wide and 0.5 inch high. That 6 inch reach is the length the connector adds between the ends of the track sections, so when you dimension a cross layout on the ceiling, each leg of track starts 6 inches out from the center point rather than butting directly at it.

The body is plastic in a white finish, traditional profile, so it blends with white track sections and a white ceiling. White is the only finish offered on the TP150.

Yes. The TP150 carries a Prop 65 notice for lead. Institutional and government buyers who track Prop 65 on submittals should record it on the fixture schedule.