NUVO Lighting TP151 X Connector, Black X Joiner, Traditional Style, Black Finish

The TP151 joins four track sections together in an X (four-way) intersection, so you can run track in two directions from one crossing point. It is a single circuit connector, meaning all four legs share the same circuit and switch together. If you need independent switching on different branches, an X connector on a single circuit track system will not give you that.

Yes. The TP151 is rated 120V and is a single circuit component, so it belongs in a standard line voltage single circuit track system. Do not use it in a two circuit or low voltage system.

No. The TP151 carries a Dry location rating only, so it is limited to interior dry spaces. Covered exterior soffits, bathrooms over a tub or shower, and unconditioned areas that see condensation need a damp or wet rated system instead.

Plan for a 6 inch extension at the intersection, with the connector body measuring 1.25 inches wide and 0.5 inches high. That extension matters when you are laying out a ceiling grid or squaring a run to a wall, because your track lengths need to account for it rather than butting straight into the crossing point.

Black is the only finish offered on the TP151, in a traditional profile intended to blend with black single circuit track. For a property standardizing on black track throughout a building, it keeps the intersections consistent with the runs.

The body is plastic, which keeps it light on the ceiling but means it should be handled carefully during install rather than forced onto a track end. Note it is flagged under CA Prop 65 for lead, which matters for buyers shipping into California.