nVent CADDY 61 Series Copper-B...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$51.59
nVent CADDY 61 Series Copper-Bonded Steel Pointed Ground Rod

nVent CADDY 61 Series Copper-Bonded Steel Pointed Ground Rod

(No reviews yet) Write a Review

Model: 615880

In Stock (leaves warehouse same day if ordered before 3pm ET)

$51.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY 61 Series Copper-Bonded Steel Pointed Ground Rod

The nVent CADDY 61 Series Ground Rod lineup delivers a dependable, code-recognized grounding electrode for electrical, telecommunications, and lightning protection installations. Each rod is manufactured from copper-bonded steel and finished with an electrolytic copper coating that is molecularly bonded to the steel core for lasting corrosion resistance, combining the tensile strength of a steel core with the conductivity of copper. Previously marketed under the Erico designation, this series is available in multiple diameter and length configurations, including the 1/2-Inch x 8-ft 611380 model, to match specific soil conditions and grounding requirements. The pointed tip on every rod eases driving into soil, making the 61 Series a practical choice for new grounding system installations and replacement of damaged or corroded ground rods.

Key Features

  • 61 Series Design: Part of the established nVent CADDY 61 Series ground rod lineup, available in multiple diameter and length configurations including the 1/2-Inch x 8-ft 611380 model, formerly marketed as the Erico ground rod line.
  • Durable Construction: Copper-bonded steel core provides a rigid, high-strength rod capable of being driven into a wide range of soil conditions without bending or deforming.
  • Electrolytic Copper Coating: A molecularly bonded copper coating over the steel core delivers long-term corrosion resistance and dependable electrical conductivity throughout the life of the installation.
  • Pointed Tip: A pointed driving end eases penetration into soil during installation, reducing installation time and effort in the field.
  • Copper-Bonded Steel: Combines the mechanical strength of a steel core with the conductivity and corrosion resistance of an outer copper layer.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Electrical Grounding and Bonding Systems
  • Telecommunications Equipment Grounding
  • Lightning Protection Systems
  • Commercial and Industrial Electrical Installations
  • New Construction and Retrofit Grounding Electrode Replacement

Why nVent CADDY?

nVent CADDY 61 Series ground rods are engineered with copper-bonded steel construction and an electrolytic copper coating to deliver long-lasting corrosion resistance and dependable grounding performance in the field. Carrying forward the legacy of the Erico ground rod design, the 61 Series gives professional electricians and contractors a durable, code-recognized grounding electrode suited for demanding job-site conditions and long-term service life across multiple diameter and length configurations.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

list_batch:
CDY-20260915
Product Type:
Ground Rod
Product Finish:
Electrolytic Copper Coating
Series:
61 Series
Department:
Electrical
Product Group:
Grounding & Bonding
Product Subgroup:
Grounding & Bonding
Product Material:
Copper-Bonded Steel
Product Size:
1/2-Inch x 8-ft

nVent CADDY 615880 – Frequently Asked Questions

1) Is the nVent CADDY 61 Series ground rod solid copper or copper-bonded steel?
Copper-bonded steel. The 61 Series rod has a steel core for driving strength with an electrolytic copper coating molecularly bonded to it, so you get the rigidity of steel and the conductivity and corrosion resistance of copper. That is different from a solid copper electrode and from a galvanized steel rod, which is why these drive into hard soil without mushrooming or bending the way softer rods can.
2) What size is the nVent CADDY 611380 ground rod?
The 611380 is a 1/2 inch diameter by 8 foot rod with a pointed driving tip. It is one of several diameter and length configurations in the 61 Series, so if your local inspector or the job spec calls for a heavier rod, order a different model in the series rather than this one.
3) Is this the same as the old Erico ground rod?
Yes. The 61 Series was previously marketed under the Erico designation and is now sold under the nVent CADDY brand. Same 61 Series numbering, so an Erico 611380 and an nVent CADDY 611380 refer to the same rod.
4) Which nVent CADDY 61 Series ground rod models are available?
Five models are offered in the 61 Series: 611380, 613400, 613480, 615800 and 615880. They cover different diameter and length combinations, so when you order, specify the model number rather than just the series. The 611380 is the 1/2 inch by 8 foot rod.
5) Can I use this ground rod for a telecom or lightning protection ground, or is it only for electrical service grounding?
All three. The 61 Series is intended as a grounding electrode for electrical grounding and bonding, telecommunications equipment grounding, and lightning protection systems, plus general commercial and industrial installations. Same rod, different application.
6) Does the nVent CADDY ground rod come with a ground rod clamp?
No. The 61 Series rod is the electrode only. You will need to order an acorn or ground rod clamp separately, sized to the rod diameter (1/2 inch for the 611380) and to the grounding electrode conductor you are landing on it.
7) Will a copper-bonded rod hold up in corrosive soil, or should I look at something else?
The copper on a 61 Series rod is an electrolytic coating molecularly bonded to the steel core, not a plating that flakes, and it is the copper surface that sits against the soil. That gives long-term corrosion resistance in typical soil. The trade-off worth knowing: if the coating is gouged during driving, the exposed steel is what corrodes, so drive it straight and use a driving head rather than hitting the bare top with a sledge.
8) Can I use this to replace an existing corroded ground rod?
Yes, the 61 Series is intended both for new grounding system installs and for replacing damaged or corroded ground rods. The pointed tip helps it drive in alongside or in place of the old electrode. Match the diameter and length your original installation used, or the length the job spec calls for.
How fast can I get the nVent CADDY 615880 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY 615880 come with a warranty?
Absolutely. The nVent CADDY 615880 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY 615880?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY 615880 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!