nVent CADDY 633400 Copper-Bonded Steel Sectional Ground Rod, 3/4-Inch x 10-ft

nVent CADDY 633400 Copper-Bonded Steel Sectional Ground Rod, 3/4-Inch x 10-ft

The nVent CADDY 633400 Copper-Bonded Steel Sectional Ground Rod is engineered to provide a reliable grounding electrode for electrical, telecommunications, and utility systems. Built from a copper-bonded steel core with an electrolytic copper coating, this sectional ground rod measures 3/4-Inch x 10-ft and is designed to be driven into the earth to establish a low-resistance ground connection. The sectional configuration allows multiple rods to be coupled together, extending grounding depth to meet site and code requirements. Sectional ground rods like this design use coupled connections so installers can extend total driven length without special equipment, making them well suited for rocky or dense soil conditions where a single ten-foot section may not reach adequate grounding depth.

Key Features

• Trade Size: 3/4-Inch x 10-ft dimension sized for standard grounding electrode installations.
• Durable Construction: Copper-bonded steel core delivers mechanical strength for driving into soil while resisting corrosion.
• Electrolytic Copper Coating: A bonded copper coating over the steel core provides a highly conductive surface for effective grounding performance.
• Sectional Design: Sectional configuration allows rods to be coupled end-to-end, enabling deeper driving where soil resistivity requires additional length.
• Ground Rod Type: Purpose-built as a grounding electrode for electrical and telecommunications grounding systems.
• Below-Grade Durability: The copper-bonded steel construction is designed to withstand direct burial and driving forces without compromising the conductive copper surface.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Electrical Service Grounding Electrode Systems
• Telecommunications and Data Center Grounding
• Utility and Substation Grounding
• Commercial and Industrial Electrical Installations
• New Construction and Retrofit Grounding Upgrades

Why nVent CADDY?

nVent CADDY grounding products are built with copper-bonded steel construction and electrolytic copper coatings to deliver dependable, code-compliant grounding performance. The 633400 sectional ground rod's coupled-section design gives electrical contractors the flexibility to reach proper grounding depth on demanding job sites, backed by the durability professionals expect from nVent CADDY. Contractors specify nVent CADDY grounding products for their consistent quality and ease of installation, helping electrical, low-voltage, and utility crews complete grounding electrode systems efficiently and reliably.