nVent CADDY Armour Spring Stee...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1.40
nVent CADDY Armour Spring Steel Type SC Cable Snap Clip

nVent CADDY Armour Spring Steel Type SC Cable Snap Clip

(No reviews yet) Write a Review

Model: SC4D

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY Armour Spring Steel Type SC Cable Snap Clip

The nVent CADDY Type SC Armour Spring Steel Cable Snap Clip is available in two model sizes, SC2D and SC4D, engineered to attach cable, wire rope, conduit, or threaded round stock directly to structural flanges, studs, or framing members without separate fasteners. Formed from Armour Spring Steel, the Type SC clip is sized to accept round stock, cable, or conduit generally from 3/16" to 9/32" in diameter and snaps into place by hand, eliminating drilling or welding on the jobsite. Formerly cataloged under the Erico name, the Type SC snap clip line is now part of the nVent CADDY family, delivering consistent spring tension and a secure grip for commercial, industrial, and mechanical/electrical support applications.

Key Features

  • Model Range: Available in SC2D and SC4D sizes within the Type SC snap clip line to match different support requirements.
  • Diameter Capacity: Accepts round stock, cable, or conduit from 3/16" to 9/32" in diameter for a secure, properly sized fit.
  • Durable Construction: Formed from Armour Spring Steel for lasting spring tension, strength, and resistance to deformation under repeated load cycles.
  • Type SC Snap-On Design: Snaps directly onto flanges, studs, or structural framing by hand, speeding installation without tools, drilling, or welding.
  • Tool-Free Installation: Reduces labor time on cable, wire rope, and conduit support runs compared to drilled or welded attachment methods.
  • Compact, Low-Profile Footprint: The spring steel clip body sits close to the mounting flange, keeping cable and conduit runs neat along structural framing.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Cable and Wire Rope Support Runs Along Structural Framing
  • Conduit Attachment to Beams, Studs, and Flanges
  • Threaded Rod and Round Stock Retention
  • Commercial and Industrial Electrical Installations
  • Mechanical and Electrical Support in Renovation and New Construction Projects

Why nVent CADDY?

nVent CADDY, formerly known as Erico, is an established name in cable and conduit support hardware for electrical and mechanical contractors. The Type SC Armour Spring Steel Cable Snap Clip line, offered in SC2D and SC4D sizes, is built for dependable, tool-free retention on the jobsite, giving installers a fast, repeatable way to secure cable, wire rope, conduit, or round stock to structural framing without compromising on hold strength. The spring steel construction is designed to maintain its grip through the vibration and thermal cycling common in commercial and industrial building environments, making the Type SC snap clip a practical choice for contractors who need a quick, reusable support solution that still holds up over the life of the installation.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

Product Type:
Cable Clip
Series:
Type SC
Configuration:
Type SC
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Cable Support Systems
list_batch:
CDY-20260915
Product Material:
Armour Spring Steel
Connection Type:
Snap-On
Product Size:
3/16" - 9/32"

nVent CADDY SC4D – Frequently Asked Questions

1) What size cable or rod does the nVent CADDY Type SC snap clip hold?
The Type SC clip accepts round stock, cable, wire rope, or conduit from 3/16 inch to 9/32 inch in diameter. Anything outside that window won't seat with proper spring tension, so measure the actual stock diameter rather than going by the nominal name of the run.
2) Do I need to drill or weld to install the CADDY Type SC clip?
No. The Type SC is a snap-on clip: it pushes onto a structural flange, stud, or framing member by hand, with no drilling, welding, or separate fasteners. That is the main reason electrical crews use it on long cable and conduit runs where drilling every attachment point would eat the labor budget.
3) Is the CADDY Type SC the same as the old Erico SC snap clip?
Yes. The Type SC snap clip line was formerly catalogued under the Erico name and is now sold as nVent CADDY. The SC2D and SC4D model designations carry over, so an Erico print or bill of materials calling for an SC2D or SC4D is referring to this same clip.
4) What is the difference between the SC2D and SC4D snap clips?
Both are Type SC Armour Spring Steel snap clips and both are ordered by model: SC2D and SC4D. They are the two sizes offered in the line, sized to match different support requirements within the 3/16 inch to 9/32 inch stock range. Order by the model designation stamped on the box, since the two are not interchangeable on the same flange thickness.
5) Will a spring steel snap clip hold up in a vibrating industrial space, or should I use a bolted strap?
The Type SC is formed from Armour Spring Steel specifically to keep its spring tension through the vibration and thermal cycling found in commercial and industrial buildings, and it resists deformation under repeated load cycles. Where you have a flange, stud, or framing member to grab, it is the faster attachment. Where there is no structural edge to snap onto, or the stock is larger than 9/32 inch, you need a drilled or bolted strap instead.
6) Can I use the CADDY Type SC clip to support threaded rod?
Yes, within the diameter limits. The clip is intended for threaded round stock retention as well as cable, wire rope, and conduit, and it accepts stock from 3/16 inch to 9/32 inch. That covers small round stock only, so 3/8 inch and larger hanger rod is outside its range.
7) Do I need any extra fasteners or anchors with the Type SC snap clip?
None. The Type SC attaches directly to the structure with no separate fasteners, screws, or anchors, so the clip is the complete attachment. All you need on site is the flange, stud, or framing member to snap it onto.
8) Can the Type SC clip be reused if I have to move a cable run?
Yes. Because it snaps on by hand rather than being drilled or welded in place, the Type SC can be taken off and reset, which is why it gets specified on renovation work where runs get relocated. The spring steel body is built to hold its tension rather than take a permanent set.
How fast can I get the nVent CADDY SC4D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY SC4D come with a warranty?
Absolutely. The nVent CADDY SC4D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY SC4D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY SC4D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!