nVent CADDY 4Z34 Armour Spring...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3.70
nVent CADDY 4Z34 Armour Spring Steel Snap-Close Conduit-to-Rod/Wire Clip

nVent CADDY 4Z34 Armour Spring Steel Snap-Close Conduit-to-Rod/Wire Clip

(No reviews yet) Write a Review

Model: 4Z34812M

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY 4Z34 Armour Spring Steel Snap-Close Conduit-to-Rod/Wire Clip

The nVent CADDY 4Z34 Armour Spring Steel Snap-Close Conduit-to-Rod/Wire Clip is engineered for fast, tool-free conduit support in commercial and industrial electrical installations. Formed from durable spring steel, this clip family features a snap-close design that quickly attaches EMT conduit directly to a threaded rod or wire, eliminating the need for separate mounting hardware, straps, or fasteners. The 4Z34 Armour clip is available in trade sizes from 1/2-Inch through 1-Inch EMT, giving installers a single, dependable clip family that covers common conduit diameters on a single job. Its compact, low-profile body suits dense conduit runs where installation speed, jobsite efficiency, and dependable long-term support are essential for the electrical contractor.

Key Features

  • Trade Size Range: Available across sizes from 1/2-Inch through 1-Inch EMT conduit to match a variety of raceway diameters.
  • Durable Construction: Formed from spring steel for long-lasting strength, spring tension, and reliable holding power over time.
  • Snap-Close Design: Tool-free snap-close closure allows quick, secure attachment to conduit without additional fasteners, saving labor time on the jobsite.
  • Conduit-to-Rod/Wire Mounting: Connects EMT conduit directly to threaded rod or wire, giving installers flexible suspension and support options overhead.
  • Armour Series: Part of the nVent CADDY Armour line of spring steel conduit support products built for demanding commercial and industrial environments.
  • Space-Saving Profile: Compact clip body helps maintain clearance in congested conduit runs, ceiling cavities, and plenum spaces.
  • Single-Piece Design: One-piece spring steel body reduces installation steps compared to multi-part clamp assemblies.

Technical Specifications

  • Product Type: Conduit Clip

Typical Applications

  • EMT Conduit Support Systems
  • Rod and Wire Suspension Installations
  • Commercial and Industrial Electrical Installations
  • New Construction and Retrofit Wiring Projects
  • Overhead Conduit Runs in Ceilings and Plenum Spaces
  • Data Center, Office, and Institutional Electrical Rough-In

Why nVent CADDY?

nVent CADDY is a trusted name in conduit and cable support solutions, known for engineering products that simplify installation while delivering dependable, long-term performance for electrical professionals. The Armour Spring Steel Snap-Close Clip family reflects that standard, combining rugged spring steel construction with a fast, tool-free mounting method built for the demands of professional electrical work. By pairing a single-piece design with a snap-close connection to rod or wire, this clip family helps contractors move through conduit support installation more efficiently while maintaining a secure, long-lasting hold across 1/2-Inch through 1-Inch EMT runs.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Material:
Spring Steel
Product Type:
Conduit Clip
list_batch:
CDY-20260915
Product Subgroup:
Hangers, Straps & Supports
Configuration:
Snap-Close
Series:
Armour

nVent CADDY 4Z34812M – Frequently Asked Questions

1) What conduit sizes does the nVent CADDY 4Z34 Armour clip cover?
The 4Z34 Armour snap-close clip family covers 1/2-inch through 1-inch EMT. It comes in two part numbers: 4Z34812M handles the combined 1/2-inch to 3/4-inch range, and 4Z3416M is the 1-inch clip. Two SKUs cover the three most common trade sizes on a commercial rough-in, so a crew running mixed 1/2, 3/4 and 1-inch EMT only has to stock two boxes.
2) Can I use the 4Z34 clip to hang EMT off threaded rod without a separate hanger or strap?
That is exactly what it does. The 4Z34 Armour clip connects EMT directly to a threaded rod or to wire, so you do not need a separate strap, clamp assembly or fastener at the support point. It is a one-piece spring steel body with a snap-close closure, so the conduit goes in by hand with no tools.
3) Is the 4Z34 clip for EMT only, or will it hold rigid or flexible conduit too?
Spec is EMT. The 4Z34 Armour clip is sized by EMT trade size (1/2-inch through 1-inch), and spring steel snap-close clips grip on the outside diameter of the raceway they are cut for. Rigid and IMC have a larger OD than EMT of the same trade size, so a 4Z34 sized for 3/4-inch EMT will not close correctly on 3/4-inch rigid. Size to EMT.
4) Which 4Z34 part number do I order for 3/4-inch EMT?
Order 4Z34812M. That part covers the 1/2-inch to 3/4-inch range, so it serves both sizes. The separate 4Z3416M is only for 1-inch EMT.
5) Will the 4Z34 clip work in a tight ceiling cavity with conduits run close together?
Yes, that is one of the reasons to use it. The clip body is compact and low-profile, which keeps clearance in congested conduit runs, ceiling cavities and plenum spaces. Because it is a single piece rather than a multi-part clamp assembly, there is no nut, bolt or backing plate sticking out past the raceway.
6) Snap-close spring steel clip or a two-piece conduit clamp with a bolt: which should I use overhead?
Pick the snap-close clip when you are hanging a lot of EMT off rod or wire and labor time is the driver. The 4Z34 goes on by hand, no tools, no loose hardware to drop from a lift, and the spring tension does the holding. A bolted two-piece clamp makes more sense when you need an adjustable clamping force on a raceway type the clip is not cut for, or where the conduit is not being suspended from rod or wire at all. For straight overhead EMT support in ceilings and plenums, the clip is the faster install.
7) What is the 4Z34 clip actually made of, and will it hold tension long term?
Spring steel, one piece. That is the point of the design: the steel is formed so it stays sprung, which is what keeps the clip's grip on the conduit and on the rod or wire over the life of the run rather than relying on a fastener that can back off.
8) Is the 4Z34 Armour clip suitable for a retrofit, or only new construction?
Both. The clip is used in new construction rough-in and in retrofit wiring work. Retrofit is where the tool-free closure helps most, since you can add a support to an existing rod or wire drop in an occupied ceiling without pulling the conduit down or fishing hardware behind it.
How fast can I get the nVent CADDY 4Z34812M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY 4Z34812M come with a warranty?
Absolutely. The nVent CADDY 4Z34812M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY 4Z34812M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY 4Z34812M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!