nVent CADDY DH Series Threaded...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$400.97
nVent CADDY DH Series Threaded Rod Deck Clamp, Steel Deck Flange Mount, Pack of 100

nVent CADDY DH Series Threaded Rod Deck Clamp, Steel Deck Flange Mount, Pack of 100

(No reviews yet) Write a Review

Model: DH4TI

In Stock (leaves warehouse same day if ordered before 3pm ET)

$400.97
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY DH Series Threaded Rod Deck Clamp, Steel Deck Flange Mount

The nVent CADDY DH Series deck clamp gives electrical and mechanical contractors a fast, drill-free, weld-free way to hang threaded rod from a structural steel deck flange. Available in DH4TI and DH6TI model options, the DH Series attaches directly to the flange of the steel decking to create a secure hanging point for a threaded rod hanger assembly — the DH4TI is sized to accept 1/4 threaded rod for lightweight to medium-duty overhead runs such as single conduit runs or small cable tray sections. This deck flange mount configuration suits suspending conduit, cable tray, mechanical piping, and ductwork on new construction, tenant improvement, and retrofit projects.

Key Features

  • Trade Size: The DH4TI option is sized to accept 1/4 threaded rod, suitable for lightweight to medium-duty overhead support runs such as single conduit runs or small cable tray sections.
  • DH Series Design: Model options including the DH4TI and DH6TI share a common mounting concept for steel deck flanges within the nVent CADDY DH Series lineup.
  • Deck Clamp Function: Attaches directly to the flange of steel decking to create a secure hanging point for threaded rod, helping installers avoid drilling or welding directly into the deck.
  • Deck Flange Mount Configuration: The clamp's deck-side attachment point is purpose-built for steel deck flanges, keeping installation drill-free and weld-free.
  • Clear Model Designations: DH4TI and DH6TI model numbers simplify specification, ordering, and inventory tracking on the jobsite.
  • Rod Hanger Assembly: Functions as the deck-side connection in a threaded rod hanger assembly, pairing with rod, nuts, and hardware selected for the specific support application.
  • Support System Compatibility: Works with standard threaded rod used across a wide range of conduit, cable tray, and mechanical support hanger systems.

Technical Specifications

  • Configuration: Deck Flange Mount

Typical Applications

  • Overhead Conduit and Cable Tray Support
  • Suspended Mechanical Piping and Ductwork
  • Commercial and Industrial Rod Hanger Systems
  • Renovation, Retrofit, and New Construction Projects
  • Structural Steel Deck Support Applications

Why nVent CADDY?

nVent CADDY supplies fastening and support products used across electrical and mechanical trades, and the DH Series deck clamps reflect that same focus on straightforward, dependable rod attachment. Standardizing on the DH Series for deck-mounted rod support helps contractors maintain consistent hardware and installation methods across a project. The DH4TI and DH6TI options give crews clearly identified nVent CADDY part numbers within the DH Series lineup for steel deck flange mounting.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

list_batch:
CDY-20260915
Product Type:
Beam Clamp
Series:
DH
Configuration:
Deck Flange Mount
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Clamps
Pack size (unit):
100

nVent CADDY DH4TI – Frequently Asked Questions

1) What rod sizes does the nVent CADDY DH Series deck clamp come in?
Two rod sizes: the DH4TI takes 1/4 inch threaded rod and the DH6TI takes 3/8 inch threaded rod. Both are the same deck flange mount concept, so pick by the rod diameter your hanger assembly uses. 1/4 inch rod suits lighter runs like a single conduit or a small cable tray section; 3/8 inch is the usual choice when the load or the span steps up.
2) Can I hang conduit from a steel deck without drilling or welding?
That is exactly what the DH Series deck clamp is for. It clamps onto the flange of the steel decking to create the hanging point for a threaded rod hanger, so there is no drilling into the deck and no welding. Useful on tenant improvement and retrofit work where you cannot disturb the deck, as well as new construction.
3) Does the DH deck clamp come with the threaded rod and nuts?
No. The deck clamp is only the deck-side connection in the assembly. You supply the threaded rod in the matching size (1/4 inch for DH4TI, 3/8 inch for DH6TI) plus nuts and whatever pipe, conduit or tray attachment hardware the run calls for.
4) Will a DH Series clamp work on a concrete deck or a bar joist?
No. The DH is a deck flange mount clamp, built to grip the flange of steel decking. For concrete overhead or for a beam or joist flange you need a different attachment type, such as a concrete anchor assembly or a beam clamp sized to the flange thickness.
5) Is the nVent CADDY DH4TI sold individually or in a box?
The DH4TI and DH6TI deck clamps ship 100 to a pack. That is a jobsite quantity, which is how most crews buy them when they are laying out a whole overhead run on deck.
6) Which DH part number should I standardize on across a project?
Standardize on the rod size the rest of your hanger hardware uses. If your trapeze and conduit hangers are built around 3/8 inch rod, order DH6TI throughout; for 1/4 inch rod runs, DH4TI. Keeping one part number per project keeps the clamp, rod and nut inventory consistent and the install method the same for every crew.
How fast can I get the nVent CADDY DH4TI delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY DH4TI come with a warranty?
Absolutely. The nVent CADDY DH4TI is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY DH4TI?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY DH4TI from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!