nVent CADDY 1/4" Rod Beam Clam...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$387.11
nVent CADDY 1/4" Rod Beam Clamp, Structural Steel Flange Mount, Pack of 100

nVent CADDY 1/4" Rod Beam Clamp, Structural Steel Flange Mount, Pack of 100

(No reviews yet) Write a Review

Model: 4TI58

In Stock (leaves warehouse same day if ordered before 3pm ET)

$387.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY 1/4" Rod Beam Clamp, Structural Steel Flange Mount

The nVent CADDY 1/4" Rod Beam Clamp is a family of beam clamps built to give electrical and mechanical installers a fast, secure suspension point on structural steel. Sized for 1/4" threaded rod, these clamps attach directly to a beam flange, giving crews a dependable anchor for hanging conduit, cable tray, and pipe runs without drilling or welding into the beam itself. The CADDY beam clamp lineup covers several clamp configurations to match different beam flange profiles while keeping a consistent 1/4" rod connection across the family, so installers can standardize on one rod-and-clamp support system for an entire jobsite. It suits the rough-in pace of commercial and industrial jobsites.

Key Features

  • Rod Size: Sized for 1/4" threaded rod, matching the support rod commonly used for conduit, cable tray, and pipe hanger drops.
  • Beam Flange Attachment: Beam clamp geometry engages the flange of a structural steel beam, creating a suspension point without welding or drilling into the beam itself.
  • Field-Ready Design: Compact clamp profile is sized for quick hand or wrench tightening, helping crews move through overhead support layouts efficiently.
  • Repositionable Support: The clamp can be shifted along the beam flange as layouts change, giving installers flexibility during rough-in before final rod placement is locked in.
  • Multiple Configurations: Available across the CADDY beam clamp family so installers can match a clamp configuration to the beam flange on hand while keeping a consistent 1/4" rod connection.
  • Rod-Ready Assembly: Designed to pair with standard 1/4" threaded rod so installers can build out a complete beam-to-rod support drop for conduit, cable tray, or pipe.
  • No Special Tools Required: Installs onto the beam flange using common hand tools, keeping overhead support setup straightforward for field crews.

Technical Specifications

  • Product Size: 1/4"

Typical Applications

  • Suspending Conduit Runs from Structural Steel Beams
  • Supporting Cable Tray Systems in Commercial and Industrial Buildings
  • Hanging Mechanical Piping from Beam Flanges
  • Structural Support in New Construction and Renovation Projects
  • Overhead Rod-and-Clamp Support Assemblies on Structural Steel
  • Electrical Contractor Rough-In on Commercial Job Sites

Why nVent CADDY?

nVent CADDY is a recognized name in structural attachment and support hardware for electrical and mechanical contractors. This beam clamp family reflects that same focus on practical, field-ready components that help installers secure conduit, cable tray, and piping to structural steel quickly and reliably, without resorting to drilling or welding on the beam. Specifying nVent CADDY beam clamps sized for 1/4" rod helps installers keep overhead support consistent from beam flange to hanger across a jobsite. Specify nVent CADDY support hardware for demanding commercial and industrial job sites.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

Product Type:
Beam Clamp
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Clamps
list_batch:
CDY-20260915
Product Size:
1/4"
Pack size (unit):
100

nVent CADDY 4TI58 – Frequently Asked Questions

1) What rod size do the nVent CADDY beam clamps take?
They're sized for 1/4 inch threaded rod, and that rod size is consistent across all four models (4TI58, 4TI912, 6TI58, 6TI912). That lets a crew standardize one rod diameter for conduit, cable tray, and pipe drops across a whole job instead of carrying two rod sizes on the cart. The rod itself is bought separately.
2) Can I hang conduit from a steel beam without drilling or welding it?
That's exactly what these CADDY clamps are for. The clamp engages the flange of a structural steel beam mechanically, so you get a suspension point with no holes drilled and no welding on the member. It also means the clamp can be slid along the flange during rough-in if the layout shifts before you lock in rod placement.
3) What else do I need to order to build a complete hanger drop with a CADDY beam clamp?
The clamp is the beam-to-rod attachment point only. You still need the 1/4 inch threaded rod cut to your drop length, plus whatever hanger sits at the bottom of the rod, a conduit hanger or strap, a trapeze for cable tray, or a pipe hanger, along with the nuts to land it. Specify all of it at 1/4 inch so it mates with the clamp.
4) What is the difference between the 4TI and 6TI CADDY beam clamps?
Both families run the same 1/4 inch rod connection. The difference is clamp configuration, meant to match different structural steel beam flange profiles, so you pick the model that suits the flange you're working on and keep the rod and hanger hardware the same either way. Four models are offered: 4TI58, 4TI912, 6TI58 and 6TI912.
5) Can these beam clamps support cable tray, or only conduit?
Both, plus mechanical piping. The CADDY 1/4 inch rod beam clamps are used as the overhead anchor for conduit runs, cable tray systems, and pipe hung off beam flanges in commercial and industrial buildings, new construction and renovation alike. The clamp provides the suspension point; the tray or pipe hanger at the bottom of the rod determines the load path from there.
6) Do I need special tools to install a CADDY 1/4 inch beam clamp?
No. The clamps install onto the beam flange with common hand tools, and the compact profile is sized for hand or wrench tightening overhead. That's part of why they get specified for rough-in pace on commercial and industrial jobs, where a crew is setting a lot of drops in a shift.
7) I'm ordering by part number, which CADDY beam clamps are these?
The four nVent CADDY manufacturer part numbers are 4TI58, 4TI912, 6TI58 and 6TI912, all 1/4 inch rod beam clamps for structural steel flange mounting.
How fast can I get the nVent CADDY 4TI58 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY 4TI58 come with a warranty?
Absolutely. The nVent CADDY 4TI58 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY 4TI58?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY 4TI58 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!