nVent CADDY Electrogalvanized ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.62
nVent CADDY Electrogalvanized Steel Structural Beam Clamp Rod

nVent CADDY Electrogalvanized Steel Structural Beam Clamp Rod

(No reviews yet) Write a Review

Model: BC200

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.62
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY BC200 Electrogalvanized Steel Structural Beam Clamp Rod

The nVent CADDY BC200 Beam Clamp Rod is a steel beam clamp with an electrogalvanized finish, engineered to give electrical and mechanical contractors a fast, secure attachment point on structural steel beam flanges. Available in 1/4-Inch and 3/8-Inch rod sizes, the BC200 clamps directly to the beam flange without drilling, welding, or beam penetration, preserving structural integrity while speeding up rough-in work. It provides a dependable mounting point for threaded rod used to suspend conduit, cable tray, strut channel, and other overhead electrical and mechanical systems, and carries forward the engineering of the Erico beam clamp line now under the nVent CADDY brand.

Key Features

  • Trade Size Range: Available in 1/4-Inch and 3/8-Inch rod sizes to match project support requirements.
  • Durable Construction: Built from steel for dependable strength under sustained rod loads and long-term overhead support duty.
  • Finish: Electrogalvanized coating applied for corrosion resistance and extended service life compared to uncoated steel.
  • Beam Clamp Design: Clamps directly onto structural steel beam flanges without drilling or welding, reducing installation time and avoiding damage to the beam.
  • Rod Support: Provides a secure attachment point for threaded rod used to suspend conduit, cable tray, strut channel, ductwork supports, and other overhead systems.
  • Jobsite Ready: Tool-tightened installation reduces labor time versus drilled or welded beam attachments, helping crews move faster through rough-in.
  • Brand Continuity: Model BC200 carries forward the engineering and fit of the Erico beam clamp line now under the nVent CADDY brand, making it easy to specify and reorder for repeat projects.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Structural Steel Beam Mounting
  • Conduit and Cable Tray Support Systems
  • Strut and Threaded Rod Suspension
  • Commercial and Industrial Electrical Installations
  • Mechanical and Fire Protection Rough-In
  • Renovation and New Construction Projects

Why nVent CADDY?

nVent CADDY, the successor to the long-trusted Erico brand, builds support and attachment products around real jobsite needs: fast installation, durable steel construction, and finishes like electrogalvanizing that hold up over the working life of the installation. Contractors who relied on Erico beam clamps for structural steel mounting will find the same fit, form, and function in the BC200 under the nVent CADDY name. For electrical and mechanical crews supporting conduit, cable tray, and strut systems from structural steel beams, the BC200 Beam Clamp Rod offers a straightforward way to attach overhead support without compromising the beam itself, backed by a manufacturer with decades of experience in fastening and support products for the electrical trade.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

list_batch:
CDY-20260915
Product Type:
Beam Clamp
Product Finish:
Electrogalvanized
Series:
BC200
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Clamps
Product Material:
Steel

nVent CADDY BC200 – Frequently Asked Questions

1) Which rod size do I order for the nVent CADDY BC200 beam clamp, 1/4-inch or 3/8-inch?
The BC200 beam clamp comes in two rod sizes: 1/4-inch (model BC200) and 3/8-inch (model BC400). Match the size to the threaded rod you are hanging with. Lighter runs of small conduit typically go on 1/4-inch rod; cable tray, strut channel, and heavier trapeze supports normally call for 3/8-inch, so order the BC400 for those.
2) Can I hang conduit from a steel beam without drilling or welding the beam?
Yes. The nVent CADDY BC200 clamps directly onto a structural steel beam flange and is tightened with a hand tool, so there is no drilling, welding, or penetration of the beam. That keeps the structural member intact, which is usually what the structural engineer wants to hear on a renovation or tenant fit-out.
3) We used to spec Erico beam clamps. What is the nVent CADDY replacement?
The BC200 is the same beam clamp line, just rebranded. nVent CADDY is the successor to Erico, and the BC200 carries forward the fit, form, and function of the Erico beam clamp for structural steel mounting. If your submittals still call out Erico, the BC200 (1/4-inch rod) or BC400 (3/8-inch rod) is what you reorder.
4) Is the BC200 beam clamp okay for a damp or unheated industrial space?
The clamp body is steel with an electrogalvanized finish, which adds corrosion resistance over bare steel for normal indoor and sheltered industrial service. Electrogalvanizing is a thin coating, so for continuously wet, exterior, or corrosive chemical environments you want a hot dip galvanized or stainless attachment instead.
5) What else do I need to order with a BC200 beam clamp to finish the hanger?
The BC200 is the beam attachment point only. You still need the threaded rod in the matching size (1/4-inch or 3/8-inch), plus whatever supports the load at the bottom: conduit hangers, strut channel and channel nuts, or cable tray hangers, along with nuts and washers to terminate the rod. Cut the rod to your drop length on site.
6) Will a beam clamp work on a bar joist or a concrete deck?
No. The BC200 is designed to clamp onto a structural steel beam flange. For open web bar joists you need an angle or joist-specific hanger that grips the joist chord, and for concrete deck you need a drop-in anchor or a deck clip. Use the beam clamp only where there is a flange to grip.
7) Can the BC200 beam clamp be used for mechanical and fire protection work, or is it electrical only?
It is used on both. Typical applications include conduit and cable tray support, strut and threaded rod suspension, ductwork supports, and mechanical and fire protection rough-in, in commercial and industrial buildings as well as renovation work. Fire sprinkler piping has its own listing requirements, so confirm the attachment is acceptable to the authority having jurisdiction for that specific system.
How fast can I get the nVent CADDY BC200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY BC200 come with a warranty?
Absolutely. The nVent CADDY BC200 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY BC200?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY BC200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!