nVent CADDY BC260025EG Cast Ir...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8.33
nVent CADDY BC260025EG Cast Iron Universal Beam Clamp, Tapped Hole, 1/4-Inch Rod, Electrogalvanized

nVent CADDY BC260025EG Cast Iron Universal Beam Clamp, Tapped Hole, 1/4-Inch Rod, Electrogalvanized

(No reviews yet) Write a Review

Model: BC260025EG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY BC260025EG Cast Iron Universal Beam Clamp, Tapped Hole, 1/4-Inch Rod, Electrogalvanized

The nVent CADDY BC260025EG is a Cast Iron Universal Beam Clamp built for fast, tool-free suspension of conduit, pipe, and cable support hardware directly from structural steel beam flanges. This clamp features a tapped hole sized for 1/4-Inch threaded rod, allowing installers to drop rod-supported hangers straight from the beam without drilling or welding into the structure. The Electrogalvanized finish adds corrosion resistance for dependable, long-term performance on commercial and industrial electrical jobs where support hardware needs to hold up over time.

Key Features

  • Universal Beam Clamp Design: Engineered to fit a range of structural steel beam flanges for quick, tool-free installation with no drilling or welding required.
  • Durable Construction: Cast Iron body delivers the strength and rigidity electrical contractors need for sustained rod-hung hanger loads on beam-mounted supports.
  • Tapped Hole Connection: A pre-tapped hole accepts threaded rod directly, letting installers make up the rod connection in the field without additional couplings or hardware.
  • 1/4-Inch Rod Compatibility: Sized specifically for standard 1/4-Inch threaded rod, matching common rod-hung conduit, cable tray, and support-system layouts.
  • Electrogalvanized Finish: The zinc-based Electrogalvanized coating helps resist corrosion so the clamp keeps performing after installation, even in demanding environments.
  • Beam-Mounted Support: Clamps directly onto the beam flange, keeping the load path tied to the building structure rather than to drilled or welded attachments.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Suspending Conduit and Raceway Systems from Structural Steel Beams
  • Rod-Hung Cable Tray and Support Rod Systems
  • Commercial and Industrial Electrical Installations
  • New Construction Overhead Support Runs
  • Retrofit and Renovation Projects Requiring Beam-Mounted Supports

Why nVent CADDY?

nVent CADDY (Caddy®) beam clamps are built from Cast Iron for dependable strength in demanding overhead support applications, and the BC260025EG carries that same engineering into a compact, field-ready fitting. The tapped-hole design and 1/4-Inch rod compatibility give electrical contractors a fast, drill-free way to attach rod-hung hardware to structural steel, while the Electrogalvanized finish is built to help the clamp resist corrosion over years of service. For installers who need beam-mounted support hardware that goes in quickly and stays reliable, nVent CADDY is a trusted name in electrical and mechanical support products.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

list_batch:
CDY-20260915
Product Type:
Beam Clamp
Product Finish:
Electrogalvanized
Connection Type:
Tapped Hole
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Hangers, Straps & Supports
Product Material:
Cast Iron

nVent CADDY BC260025EG – Frequently Asked Questions

1) Does the nVent CADDY BC260025EG beam clamp take 1/4-inch threaded rod directly, or do I need a coupling?
Rod threads straight into the clamp. The BC260025EG has a tapped hole sized for 1/4-inch threaded rod, so you make up the rod connection in the field with no coupling or extra hardware. If your hanger run is on 3/8-inch rod, this is the wrong clamp.
2) Can I hang conduit from a steel beam without drilling or welding the structure?
That is what this cast iron universal beam clamp is for. It clamps onto the beam flange, so the load path stays in the structural steel and you avoid drilling or welding into the beam. Drop 1/4-inch rod from the tapped hole and hang your conduit, cable tray, or support hardware off it.
3) Is an electrogalvanized beam clamp okay for a damp or industrial interior?
The BC260025EG carries a zinc-based electrogalvanized finish for corrosion resistance in commercial and industrial service. Electrogalvanized coatings are a thin interior-duty zinc plating, so for direct exposure to weather or washdown most spec writers call out a hot-dip galvanized or stainless support instead.
4) What is the difference between a tapped-hole beam clamp and one with a through hole?
A tapped hole means the clamp is threaded, so 1/4-inch rod screws in and is retained by the clamp body itself. A through-hole clamp needs a nut on each side of the hole to capture the rod or bolt. The BC260025EG is the tapped type, which is faster on an overhead run because there is no loose hardware to juggle on a ladder.
5) Why cast iron instead of a stamped steel beam clamp?
The BC260025EG uses a cast iron body for rigidity under sustained rod-hung loads on overhead supports. Stamped spring-steel clips are lighter and quicker for very small loads, but a cast body is what contractors reach for when rod-hung conduit or tray hangs off the beam for the life of the building.
6) What part number do I order for the nVent CADDY 1/4-inch tapped electrogalvanized beam clamp?
Order BC260025EG. That is the nVent CADDY manufacturer part number for the cast iron universal beam clamp with a tapped 1/4-inch rod hole in electrogalvanized finish, and it is the only configuration under that number.
7) Is this beam clamp meant for electrical work or plumbing and mechanical hangers?
It is catalogued for electrical work and typically used to suspend conduit, raceway, cable tray, and rod-hung support systems from structural steel. The tapped connection takes any 1/4-inch threaded rod hanger, so the limit is the rod size and the load, not the trade.
How fast can I get the nVent CADDY BC260025EG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY BC260025EG come with a warranty?
Absolutely. The nVent CADDY BC260025EG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY BC260025EG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY BC260025EG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!