1.5" Galvanized Electrical Service Mast
11549 - spec sheet
Features
- Do not use petroleum based products or paint on flashing collar or plastic base
- For warranty product details, refer to the Oatey Limited Warranty document
- Not for hot-mopped or built-up roofs
- Collar unattached from flashing base for Electrical Service Mast applications
- Self-sealing collar slides over pipe and requires no caulking
- 1-1/2" Galvanized flashing
- 12.5" x 8.75" 28 gauge galvanized base
11549 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.061
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Fittings
- Product Type:
- General Fittings
- Product Weight:
- 0.55
OATEY 11549 – Frequently Asked Questions
1) What pipe size does the Oatey 11549 service mast flashing fit?
The Oatey 11549 is sized for 1-1/2 inch pipe. The galvanized flashing collar slides over the mast pipe and self-seals, so it is the right part only if your service mast conduit is 1-1/2 inch. A different conduit diameter needs a differently sized flashing.
2) Do I need to caulk around the collar on the Oatey 11549 electrical service mast flashing?
No caulking is required at the collar. The collar is self-sealing and seals as it slides down over the pipe. What you do need to avoid is petroleum based products or paint on the flashing collar or the plastic base, which will degrade the seal.
3) Can I use this Oatey service mast flashing on a flat hot-mopped or built-up roof?
No. The 11549 is not for hot-mopped or built-up roofs. It is intended for roofs where a 12.5 x 8.75 inch galvanized base can be shingled or lapped in. For a tar or built-up assembly you need a flashing rated for that roof type.
4) Why does the collar come separate from the base on the Oatey 11549?
On this part the collar ships unattached from the flashing base specifically for electrical service mast work. That lets you set the base into the roofing course first, then drop the collar down over the mast pipe from above and seat it. Standard plumbing vent flashings come as one piece; this one is deliberately two.
5) What is the Oatey part number for a 1-1/2 inch galvanized electrical service mast flashing?
Oatey 11549. That is the manufacturer part number to order or cross reference, and it covers the 1-1/2 inch galvanized service mast flashing with the unattached self-sealing collar.
6) Is the Oatey 11549 an all-metal flashing or does it have a plastic part?
It's a mix. The base is 28 gauge galvanized steel and the flashing is galvanized, but there is a plastic component at the base that the warnings call out, which is why paint and petroleum based products have to stay off both the collar and the plastic base.
How fast can I get the OATEY 11549 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 11549 come with a warranty?
Absolutely. The OATEY 11549 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 11549?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 11549 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.