You may also like
1"x 12" Copper Plated Milford Hangers
33699 - spec sheet
Features
- Pre-drilled holes for fast screw installation
- .050" minimum thickness
- Copper plated cold rolled steel
- For warranty product details, refer to the Oatey Limited Warranty document
- Used to hang copper pipe
- 1" x 12" Copper Plated Milford Hanger
33699 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.008
- Department:
- Plumbing
- Product Group:
- Plumbing Accessories
- Product Subgroup:
- Pipe Supports
- Product Type:
- Support Clamp
- Product Weight:
- 0.134
OATEY 33699 – Frequently Asked Questions
1) What size copper pipe does the Oatey 33699 Milford hanger support?
The Oatey 33699 is sized for 1 inch copper pipe, in a 12 inch strap length. The extra length lets you reach past the pipe to solid framing instead of having to land the fastener right at the pipe centerline.
2) Will a copper plated steel hanger cause corrosion against copper pipe?
The 33699 strap is cold rolled steel with a copper plating, so the surface contacting the copper tube is copper rather than bare steel. That is the standard way to avoid the galvanic reaction you get hanging copper on plain or galvanized steel strap.
3) How thick is the Oatey 33699 Milford hanger strap?
Minimum thickness is .050 inch. That is a stiff enough strap to carry a horizontal copper run between joists without the strap deforming at the fastener hole, which is why Milford hangers get specified over light perforated tape for 1 inch lines.
4) Do I need to drill the Milford hanger before fastening it?
No drilling. The 33699 comes with pre-drilled holes, so you set the pipe and drive screws straight through the strap into the joist or stud. Screws are not supplied.
5) Milford hanger or a two-hole clamp for supporting copper pipe?
Different jobs. A Milford hanger like the 33699 is a long flat strap, 12 inches for 1 inch pipe, meant to bridge from the pipe to framing and hang a horizontal run, typically off joists. A two-hole or one-hole clamp fastens the pipe tight to a flat surface it is already touching, such as a wall or a face of blocking. If the pipe sits away from the mounting surface, you want the hanger.
6) How much does one Oatey 33699 hanger weigh for a freight estimate?
Each 33699 hanger is listed at 0.134 lb, with a volume of 0.008. Handy if you're pricing out a bulk order of straps for a multi-unit rough-in.
7) What is the manufacturer part number for the 1 inch x 12 inch copper plated Milford hanger?
Oatey part number 33699. Order by that number to get the 1 inch by 12 inch copper plated version, since Milford hangers are sold in several pipe sizes and strap lengths.
How fast can I get the OATEY 33699 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 33699 come with a warranty?
Absolutely. The OATEY 33699 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 33699?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 33699 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.