You may also like
OATEY 14056 5.5 in. – 11.5 in. Master Flash® 14 in. x 14 in. Base Roof Flashing
Model: OAT-14056
5.5 in. – 11.5 in. Master Flash® 14 in. x 14 in. Base Roof Flashing
Features
Easily customized to accomodate a broad range of pipe diameters
Pliable material won't crack or break
Use silicone...
OATEY
$152.86
$145.87
2" Galvanized – 28 gauge 14" x 14" base
Features
- Do not use paint or petroleum based products on rubber collars
- Not for hot-mopped or built-up roofs
- Non-fading sealing collar
- Roof flashing slides over DWV pipe for pitch to 40 degrees
- Approved for Type B installations
- Made of rust-proof, stamped 28 gauge galvanized steel
Manufacturer Resources
Product Specs
- Pipe Diameter:
- 2in
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Fittings
- Product Type:
- General Fittings
- Product Size:
- 14in x 14in
OATEY 11961 – Frequently Asked Questions
1) How steep a roof pitch will the Oatey 11961 vent flashing work on?
It is rated for pitch up to 40 degrees. The base is flat stamped steel, so on anything steeper than that the collar will not seat properly against the pipe and you should move to a pitched or adjustable flashing.
2) Can I use this galvanized vent flashing on a flat hot-mopped or built-up roof?
No. Oatey specifically calls out that the 11961 is not for hot-mopped or built-up roofs. Those assemblies need a flashing designed to be mopped into the membrane. This one is for shingle and similar sloped roof applications and is approved for Type B installations.
3) How much roof deck does the Oatey 11961 flashing base cover?
The base measures 14 x 14 inches of 28 gauge galvanized steel. That gives you room to lap shingles over the upper half and sides while the lower flange lays over the course below. Lay out your shingle courses around that 14 inch footprint before you cut the hole.
4) Will the rubber collar on this Oatey vent flashing hold up if I paint it to match the roof?
Don't paint it. Oatey warns against paint or any petroleum based product on the rubber collar, both of which break the rubber down and lead to leaks around the stack. The collar is a non-fading type, so it holds its color without coating.
5) Is a galvanized steel vent flashing a better choice than plastic for a maintenance replacement?
The 11961 uses a rust-proof stamped 28 gauge galvanized steel base rather than a molded plastic one, so it takes foot traffic and ladder contact on the roof better than plastic and won't get brittle from UV over time. The wear part on either type is the rubber collar at the pipe, which is usually what fails first on an older flashing.
How fast can I get the OATEY 11961 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 11961 come with a warranty?
Absolutely. The OATEY 11961 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 11961?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 11961 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.