OATEY 43764 2.33" ABS Replacement Plug for the 3" and the 2" or 3" cleanout assemblies

The Oatey 43764 is the 2.33 inch ABS plug for Oatey 3 inch cleanout assemblies and for the combination 2 inch or 3 inch cleanout assemblies. It is a replacement plug only, not a complete cleanout, so order it when the body is still sound and only the plug is damaged or seized.

Yes, when the cleanout is an Oatey assembly built for either 2 inch or 2 inch/3 inch service. The 2.33 inch figure is the plug thread size, not the pipe size, and the same plug covers Oatey's 3 inch assemblies and the dual 2 inch or 3 inch assemblies. Measure the threaded opening in your existing cleanout body rather than the pipe diameter to confirm.

The plug body is ABS. That matters on two counts: it threads into ABS cleanout bodies without galling the way a metal plug can, and it will not corrode in a drain line. ABS is also the material to match if your existing cleanout assembly is black ABS rather than PVC.

For Oatey 3 inch and 2 inch/3 inch cleanout assemblies, yes. Plugs are the part that gets destroyed during rodding, so stocking the 2.33 inch ABS plug (Oatey 43764) lets maintenance restore the cleanout without cutting out and replacing the whole assembly. One plug covers both assembly sizes, which keeps the spare count down.

What you get is the 2.33 inch ABS replacement plug itself. The Oatey 43764 is sold as a replacement component for an existing cleanout assembly, so the body, ring, and any cover stay in place and are not supplied with it.

Oatey 43764. That is the manufacturer part number for the 2.33 inch ABS replacement plug used on the 3 inch and the 2 inch or 3 inch cleanout assemblies. There are no finish or size options to specify, it is a single configuration.