OATEY 82127 3 in. or 4 in. ABS...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$161.43
$111.43
OATEY 82127 3 in. or 4 in. ABS General Purpose Drain with 6 in. Brass Grate

OATEY 82127 3 in. or 4 in. ABS General Purpose Drain with 6 in. Brass Grate

(No reviews yet) Write a Review

Model: 82127
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$161.43
$111.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3 in. or 4 in. ABS General Purpose Drain with 6 in. Brass Grate

  • Features

    • Primer tap knockout is 1/2 in. IPC thread
    • Screw-in strainer helps keep drain clear of unwanted items to keep it flowing freely with fewer clogs
    • Fits a 3 in. or 4 in. pipe
    • ABS barrel commercial grade floor drain
    • For areas where traffic is expected
    • Includes 6 in. stainless steel grate in a brass finish
    • Barrel diameter is 3-1/2 in. IPS thread
    • For general service in restaurants, restrooms and other commercial applications
    • Barrel assembly is completely adjustable to meet the finished floor height
    • Barrel is made of durable PVC construction


82127 - spec sheet

Manufacturer Resources

Product Specs

Base Material:
ABS
Base Size Diameter:
4in
Connection Type:
ABS
Volume:
0.147
Department:
Plumbing
Product Group:
Plumbing
Product Subgroup:
Drainage Products
Product Type:
Drain
Product Finish:
Brass
Product Material:
ABS
Product Weight:
4

OATEY 82127 – Frequently Asked Questions

1) Will the Oatey 82127 floor drain connect to 3 inch pipe, or does it need 4 inch?
Either. The 82127 general purpose drain fits a 3 in. or 4 in. pipe, so one part covers both common commercial floor drain rough-ins. The connection is ABS, so you are solvent welding it to ABS DWV pipe, not threading or gasketing it.
2) Can the Oatey 82127 drain be set to final floor height after the slab is poured?
Yes. The barrel assembly on the 82127 is fully adjustable so the grate can be brought up or down to the finished floor height, which is what you want when tile, topping, or epoxy goes on after the rough-in. The barrel is a 3-1/2 in. IPS thread, and the strainer screws in from above.
3) Does this Oatey drain have a tap for a trap primer line?
It does. There is a primer tap knockout tapped 1/2 in. IPC thread, so you can knock it out and run a 1/2 in. trap primer line to keep the trap seal wet. That matters in restrooms and mechanical rooms where the drain rarely sees water and sewer gas becomes the complaint.
4) Is this drain rated for foot traffic in a commercial kitchen or restroom?
The 82127 is a commercial grade general purpose floor drain built for areas where traffic is expected, and Oatey lists it for general service in restaurants, restrooms, and similar commercial spaces. It is a general purpose drain, not a heavy duty or vehicular load drain, so for loading docks or drive aisles you want a cast iron drain with a load rated top instead.
5) Does the Oatey 82127 come with a trap, or do I need to add one?
No trap is included. The 82127 is the drain body, adjustable barrel, and 6 in. grate with a screw-in strainer; you provide the P-trap below it in the pipe size you are using, 3 in. or 4 in. ABS, plus solvent cement for the joint and a 1/2 in. primer line if you are using the knockout.
6) Is the 6 inch brass grate on the Oatey 82127 solid brass or plated?
The grate is stainless steel in a brass finish, 6 in. across. So you get the look of brass with a stainless body, which holds up better to mop chemicals and standing water than a plated casting. If a job spec calls out cast brass specifically, this will not satisfy it.
7) Why pick an ABS bodied floor drain over cast iron?
A plastic bodied drain like the Oatey 82127 is the usual choice when the DWV piping is already plastic: the base is ABS and the connection is ABS, so it solvent welds straight into the line with no caulked or no-hub joint, and at about 4 lb it is far easier to set and plumb than an iron body. Cast iron is what you move to for grease laden kitchen lines with high temperature discharge or where the spec calls for metal throughout.
8) What is the exact Oatey part number to order for the 6 inch brass grate general purpose drain?
Order Oatey 82127. That is the manufacturer part number for the ABS general purpose drain with the 6 in. brass finish grate sized for 3 in. or 4 in. pipe. Useful if you are standardizing floor drains across a property so every grate matches.
How fast can I get the OATEY 82127 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 82127 come with a warranty?
Absolutely. The OATEY 82127 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 82127?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 82127 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!