3/4 in. x 100' Plastic Hanger Strap – Bagged
33927 - spec sheet
Features
- Quick and inexpensive way to hang pipe from joists or raftersllStrap has alternating (1/4 in. and 1/2 in. Dia) nail holes
- Rigorously tested and proven to last in many conditions
- Flexible and easy to work with
- Non-corrosive, non-conductive, polyethylene
- Nail holes are 1/8" in diameter and spaced 3/4" apart
- Plastic Hanger Strap is used to hang pipe from joists or rafters
- Fast and economical
33927 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.033
- Department:
- Plumbing
- Product Group:
- Plumbing Accessories
- Product Subgroup:
- Pipe Supports
- Product Type:
- Support Clamp
- Product Material:
- Plastic
- Product Weight:
- 1.15
OATEY 33927 – Frequently Asked Questions
1) Can I use Oatey plastic hanger strap to hang pipe from floor joists?
That is exactly what the 33927 strap is for: hanging pipe from joists or rafters. You cut the length you need off the 100 foot coil, wrap the pipe, and nail through the pre-punched holes into the wood. No bracket sizing, no separate clamp, and because it comes as a coil you can set the loop to whatever pipe diameter you are running.
2) Will plastic hanger strap react with copper pipe like metal strap does?
No. The strap is polyethylene, non-corrosive and non-conductive, so there is no galvanic reaction against copper and no need for an isolator the way you would with bare steel or galvanized strapping on copper lines. That also makes it a reasonable choice in damp crawl spaces where metal strap rusts out.
3) What size nails work with the Oatey 33927 hanger strap, and how far apart are the holes?
The nail holes run 1/8 inch in diameter, spaced 3/4 inch apart along the strap, so a roofing nail or short common nail passes through cleanly and you always have a hole within 3/4 inch of where you want to fasten. Note the description also cites alternating 1/4 inch and 1/2 inch diameter holes, so check the coil in hand before buying nails to a tight tolerance.
4) Should I use plastic hanger strap or a rigid pipe clamp?
Plastic strap is the quick, low cost way to suspend pipe from wood framing where you just need the run supported and spaced off the joist. A rigid support clamp or hanger is the better call when the pipe has to be held at a fixed elevation, carry real load, or sit in a fire rated or seismically braced assembly. The 33927 strap is flexible by design, which is what makes it fast and also what makes it the wrong choice for anything that must not move.
5) What is the Oatey part number for the 100 foot plastic hanger strap?
Order Oatey 33927. That is the bagged 3/4 inch by 100 foot polyethylene hanger strap coil, sold one coil per bag.
How fast can I get the OATEY 33927 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 33927 come with a warranty?
Absolutely. The OATEY 33927 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 33927?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 33927 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.