Orca Hardware Cabinet Bar Pull, 6" Overall Length, 96 mm Center to Center, 12mm Diameter

96 mm is 3-3/4 inches, about a quarter inch tighter than a 4 inch ctc pull, so the two are not interchangeable on pre-drilled holes. If your cabinets are bored at 4 inches, the Omnia 1968/102 is a 4 inch center-to-center pull. Trimco's 562 Series drawer pull is offered in a 96 mm ctc option if you want a match to the Orca spacing in a different brand.

The Trimco 562 series drawer pulls are offered with a 96 mm center-to-center option, the same 96 mm hole spacing the Orca 12-Bar Pull CP-12096 uses, so it drops onto existing 96 mm drilling without redrilling the drawer front. The Trimco 562 also comes in 3-1/2 inch and 4 inch center-to-center, so confirm the 96 mm option when ordering. The Orca CP-12096 is a 12 mm diameter bar pull in zinc alloy offered in Black, Oil-Rubbed Bronze, and Satin Nickel.

Three: Black, Oil-Rubbed Bronze, and Satin Nickel. That is the full finish range on the CP-12096, so if you are matching a kitchen or a unit turn across a building, pick one and repeat it on every opening.

Orca lists the 12-Bar pull as a residential application, made of zinc alloy. It suits apartments, condos and single-family cabinetry. For a high-traffic commercial setting where you want solid brass, look at the Omnia 1968/102 or the Deltana SBP35, both forged or heavy-duty solid brass bar pulls.

No, Orca does not rate the 12-Bar pull as ADA compliant. If you are specifying for a project with accessibility requirements on cabinetry, this is not the part to put on the schedule.

The Emtek Bar Cabinet Pull from the Schaub Collection is the same round-bar profile in Emtek's line, and the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing. The Omnia 1968/102 at 4 inch centers will not land on 96 mm drilling, which is what the Orca CP-12096 uses, so plan on new holes if you switch. Orca's CP-12096 is a zinc alloy pull rather than brass.

No. The Schaub 10011 is a Sabre Collection solid brass edge pull at 4 inch center-to-center, which mounts at the edge of a door or drawer front rather than face-mounting as a standard bar. The Orca CP-12096 is a face-mounted 12 mm diameter bar pull at 96 mm centers. The Schaub Sabre edge pulls also come as the 10010 at 3 inch and the 10012 at 5 inch center-to-center if an edge pull is what the design calls for.

No. It is dummy/pull trim only, a pure grab handle with no latch, no cam, and no lock. If you need a locking drawer, the lock is a separate item.

The Orca CP-12096 is a straight 12 mm round bar in a minimal profile. If the design calls for something with more detail, Emtek's Schaub Collection includes the Alexander Cabinet Pull and the Art Deco Cabinet Pull, both styled cabinet pulls rather than plain bars, and the Emtek 8405 Select cabinet pull. Confirm each one's center-to-center against your 96 mm drilling before you switch.

Omnia publishes projection on its modern cabinet pulls: the 1969 and 1971 are each listed at 1-3/16 inch projection and the 1970 at 1-1/4 inch, all forged solid brass. The Orca CP-12096 is a 12 mm diameter bar, so its standoff is driven by the post height carrying that 12 mm bar off the face. If your knuckle clearance is tight against a countertop return or an adjacent door, the Omnia figures give you a known dimension to design to.

No. The SDC SP50 is a 50 mm spindle used in door control hardware, not cabinet trim. The Orca CP-12096 is a cabinet bar pull with dummy/pull trim function, meaning it is grip hardware with no latching mechanism and no spindle involved. The two are not interchangeable in any assembly.