Orca Hardware Preston Cabinet Pull, Bachelor Collection, 96 mm CTC

Orca lists the Preston pull as a residential product. For apartment turns, spec homes, and owner units it's the right class of hardware. For a high-traffic commercial casework job (a hospital nurse station, a school casework run), you want a heavier solid brass pull instead, such as the Deltana SBP35 square bar pull or the Omnia 1968/102, both forged or solid brass.

No. Orca states the Preston pull is not ADA compliant. If you're doing accessible units or a government, healthcare, or education project with an ADA scope, this pull won't satisfy that line item and you'll need hardware specified as compliant.

The Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch, and 96 mm center-to-center options, so the 96 mm option lands on the same hole spacing as the Orca Preston pull, which is a 96 mm center-to-center cabinet pull. Drilling stays the same on a drawer front bored for either. The Preston is zinc alloy and specified for residential use; the Trimco 562 is a drawer pull series, so confirm the styling matches the rest of the run before mixing the two brands on adjacent fronts.

No. The Orca Preston is a 96 mm center-to-center pull, which does not land on a 3 inch bore. For fronts already drilled at 3 inch centers, the Trimco 553 Series drawer pull is a 3 inch center-to-center pull, and the Schaub 10010 Sabre is a 3 inch center-to-center edge pull if the mounting condition calls for an edge rather than a face pull. Choosing one of those avoids re-boring or plugging the existing holes.

Zinc alloy. It takes a plated or painted finish well and is dimensionally stable, which is why most residential decorative pulls are made from it, but it's a softer, lighter substrate than the forged solid brass used on pulls like the Omnia 1969 or the Deltana SBP35. In a normal kitchen or bath that's fine. On a cabinet run that gets yanked hard all day, brass wears better.

Three: matte black, oil-rubbed bronze, and satin nickel. All three are at 96 mm center-to-center, so if you're standardizing a building on one bore spacing you can vary finish by unit type without changing the drilling.

Pull only. Its function is dummy/pull trim, meaning it's a grip fastened through the door or drawer front with no latching, catch, or locking mechanism of its own. If the cabinet needs to stay shut you're adding a separate catch or cabinet lock; the pull doesn't do it.

The Trimco 562 Series drawer pull is offered in a 96 mm center-to-center option, so it's the direct spacing match if the Preston isn't the look or substrate you want. If you can move the bore, Omnia's 1968/102 runs 4 inch center-to-center in forged solid brass. Emtek's Schaub collection pulls (the Bar, Alexander, and Art Deco patterns) are the design-driven alternatives.

The Orca Preston is a 96 mm center-to-center cabinet pull specified for residential use, sized and rated for cabinet doors and drawer fronts rather than appliance doors. For an appliance front, the Schaub 79-8 Steamworks is an 8 inch cabinet pull whose function is an appliance pull, which is the part built for the longer grip and heavier door of a refrigerator or range panel. Ordering the Preston for that opening gets you a pull that is short for the application.

The Orca Preston is a zinc alloy pull specified for residential application and is not ADA compliant, which makes it a fit for apartment kitchens, casework, and unit turnovers rather than a commercial hardware standard. For a heavier-duty face-mounted pull, the Deltana SBP35 modern square bar pull is described as heavy-duty solid brass at 3-1/2 inch, and the Omnia 1968/102, 1969, 1970, and 1971 are forged solid brass modern pulls. Those forged and solid brass constructions are the direction to look when a facility standard has to hold up to shared-use traffic.

The Orca Preston is a surface-mounted cabinet pull that stands off the face of the door. Where the face has to stay flush - a sliding front, a panel that passes another door, a tight reveal - an edge pull is the part to use. The Schaub Sabre edge pull comes as the 10010 at 3 inch center-to-center, the 10011 at 4 inch, and the 10012 at 5 inch, all with an edge pull function rather than a face-mounted grip. Those are a different mounting condition entirely, so plan the prep for an edge pull rather than reusing 96 mm face boring.

No. The Orca Preston is a pull with a dummy/pull trim function, meaning it is a grip fastened to the door or drawer front with no latch, spindle, or operating mechanism behind it. A spindle such as the SDC SP50 50MM spindle is a door controls part and is not a cabinet pull component - it does not pair with the Preston and ordering one alongside will not produce a latching cabinet. If the cabinet needs to latch or lock, that hardware is separate from the pull.

The Orca Preston belongs to the 15-Bachelor Collection. Emtek's Schaub Collection covers several distinct styling families that serve the same drawer and cabinet fronts: the Bar cabinet pull, the Alexander, the Art Deco, and the 8405 Select cabinet pull from the Emtek SELECT series, each carrying a cabinet knob/pull function. The Deltana SBP35 is a modern square bar pull at 3-1/2 inch if the look wanted is a squared bar rather than a rounded one. When you change families, verify the hole spacing against the 96 mm boring already in the front.