Orca Hardware CP-23096 Tahoma Handle Pull, 96 mm CTC

The Tahoma CP-23096 is specified as residential hardware, and it is not ADA compliant. For casework in a school, clinic, or any space where the millwork has to meet accessibility requirements for operable hardware, this pull won't satisfy that line item. Apartment unit kitchens, model units, and common-area millwork that isn't on the accessible-hardware schedule are where it belongs.

The Trimco 562 Series drawer pull is offered with a 96 mm center-to-center option, so it lines up on the same drilling. Trimco 553 Series is 3 inch center-to-center and will not land on 96 mm holes. If you want solid brass instead, the Omnia 1968/102 is a forged solid brass cabinet pull, but it's 4 inch center-to-center and would need the fronts redrilled.

The Orca CP-23096 Tahoma handle pull is a 96 mm center-to-center cabinet pull. The Trimco 562 Series drawer pull is offered in a 96 mm center-to-center option alongside 3-1/2 inch and 4 inch spacings, so it lands on the same hole spacing and reuses existing drilling. Trimco 553 Series drawer pulls are 3 inch center-to-center, which does not line up with 96 mm holes.

The Tahoma CP-23096 handle pull is designated for residential application. For commercial cabinetry, the Trimco 562 Series drawer pull covers the same 96 mm center-to-center spacing, and the Deltana SBP35 modern square bar pull is a heavy-duty solid brass pull at 3-1/2 inch center-to-center.

Pull only. The CP-23096 has a dummy/pull trim function, meaning it's a grip fastened through the door or drawer front with no latch, no spring return, and no lock. Cabinet catches, soft-close hardware, or a separate lock all have to be handled by other parts.

Four: Black, Oil-Rubbed Bronze, Rose Gold, and Satin Nickel. Satin Nickel and Black are the two that most readily match existing hinges and faucets in a turnover unit; Rose Gold and Oil-Rubbed Bronze are the ones to sample first if you're matching an existing set, since warm-tone finishes vary between manufacturers and rarely blend across brands.

Watch the edge pulls and appliance pulls. Schaub's 10010, 10011, and 10012 Sabre pulls are edge pulls at 3, 4, and 5 inch center-to-center, mounted on the edge of a door or slab rather than the face like the Tahoma. The Schaub 79-8 Steamworks 8 inch is an appliance pull, sized for a refrigerator or range panel, not a drawer front. Neither type swaps onto 96 mm face drilling.

The Tahoma CP-23096 is a transitional-style handle pull at 96 mm center-to-center. For forged solid brass, Omnia offers the 1968/102 modern cabinet pull at 4 inch center-to-center, plus the 1969 and 1971 with 1-3/16 inch projection and the 1970 with 1-1/4 inch projection. Deltana's SBP35 is a solid brass square bar pull at 3-1/2 inch center-to-center. All of these move you off 96 mm hole spacing, so confirm the drilling before you swap.

The Tahoma CP-23096 is a 96 mm center-to-center cabinet pull, sized for cabinet doors and drawer fronts. For appliance fronts, the Schaub 79-8 Steamworks is an 8 inch cabinet pull built as an appliance pull, giving you the longer grip an appliance door front calls for.

The Tahoma CP-23096 is not ADA compliant. For openings where you need a graspable bar profile, the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch center-to-center, and the Emtek Bar cabinet pull from the Schaub Collection is a bar-profile cabinet pull. Confirm the grip and clearance against your facility's requirement before you order.

The Tahoma is a collection, and CP-23096 is the 96 mm center-to-center handle pull within it. If your millwork mixes drawer widths, order by center-to-center for each opening rather than assuming one size covers the job, and keep the finish constant across all of them so the elevation reads consistently.

Transitional is the styling, which is the middle ground that sits with either shaker-front or flat-slab millwork. If you want a strictly modern look instead, the Deltana SBP35 is a modern square bar pull at 3-1/2 inch, and the Omnia 1969, 1970, and 1971 are modern forged solid brass pulls with projections of 1-3/16, 1-1/4, and 1-3/16 inches respectively.

The Tahoma CP-23096 is a single handle pull profile at a fixed 96 mm center-to-center, offered in Black, Oil-Rubbed Bronze, Rose Gold and Satin Nickel. Emtek's Schaub Collection is a set of distinct design families rather than one profile: the 8405 Select, the Alexander, the Art Deco, and the Bar cabinet pull, each a separate series carrying the cabinet knob/pull function. If you are matching a single transitional profile across a kitchen, the Tahoma is one shape; the Emtek collection asks you to pick a series first.

No. The SDC SP50 is a 50 mm spindle for door controls, a lock trim component that carries turning motion through a door. The Tahoma CP-23096 is a surface-mounted cabinet handle pull at 96 mm center-to-center with dummy/pull trim function, meaning it has no operating mechanism for a spindle to drive. The two are not interchangeable.