Orca Hardware CP-18160 Mission Handle Pull, 160 mm CTC

It is pull trim only, no latching mechanism. The CP-18160 is a grip you pull the door or drawer open with, so the cabinet still needs its own catch, hinge closer, or lock if you want it to stay shut or secure.

Orca rates the CP-18160 for residential use, and it is not ADA compliant. For a commercial job, a leasing office, or anywhere the openings have to meet accessibility requirements, this is not the right pull. Multi-family unit interiors and residential millwork are where it belongs.

The Orca CP-18160 Mission handle pull is built in zinc alloy. If you want forged solid brass, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, which is the nearest metric-to-imperial step up from the CP-18160's 160 mm centers. The Omnia 1969 and Omnia 1971 are also forged solid brass with 1-3/16 inch projection, and the Omnia 1970 is forged solid brass with 1-1/4 inch projection, so you can pick projection to suit the drawer face and door clearance. Note the style difference: the Orca is a Mission collection design, while the Omnia 1968, 1969, 1970 and 1971 are modern-profile pulls.

The Orca CP-18160 Mission handle pull is rated for residential application. For commercial casework and drawer fronts, the Trimco 553 series drawer pulls in 3 inch center-to-center and the Trimco 562 series drawer pulls, offered in 3-1/2 inch, 4 inch and 96 mm center-to-center, are the commercial-line equivalents. The Deltana SBP35 modern square bar pull is a heavy-duty solid brass pull at 3-1/2 inch centers. All of these sit at shorter centers than the CP-18160's 160 mm, so confirm the existing hole spacing on the drawer face before you order a swap.

No. The Orca CP-18160 Mission handle pull is drilled for 160 mm center-to-center, so it will not land on 96 mm holes without redrilling the face. The Trimco 562 series drawer pulls include a 96 mm center-to-center option and drop straight onto that existing spacing. If you are willing to redrill or are working with new fronts, the CP-18160 stays on the table at its 160 mm centers.

The Orca CP-18160 Mission handle pull is not ADA compliant. Where you need an operable grip that does not require tight grasping, look at pulls with a defined standoff: the Omnia 1970 modern cabinet pull is forged solid brass with 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are forged solid brass with 1-3/16 inch projection, all of which give a measurable hand clearance behind the bar. Confirm the projection against your facility's accessibility requirement before you specify.

Three: Black, Oil-Rubbed Bronze, and Satin Nickel. If you are matching a kitchen or a run of unit cabinetry already in oil-rubbed bronze, the same 160 mm pull is available in it, so you can extend an existing set without switching brands.

Zinc alloy, finished in black, oil-rubbed bronze, or satin nickel. That is a cast material rather than a forged solid brass one, which matters if you are specifying for a high-turnover kitchen. If you want solid brass in a cabinet pull, the Omnia 1968/102 and the Deltana SBP35 are both solid brass options.

The Orca CP-18160 is a 160 mm center-to-center cabinet pull, sized for cabinet doors and drawer fronts. For an appliance front you want a part built for that duty: the Schaub 79-8 Steamworks 8 inch cabinet pull is carried as an appliance pull. Appliance fronts typically use longer centers and heavier grip than a standard 160 mm cabinet pull, so match the appliance panel prep rather than carrying the CP-18160 across.

The Orca CP-18160 is a single Mission collection handle pull at 160 mm center-to-center, offered in Black, Oil-Rubbed Bronze and Satin Nickel. The Emtek Schaub collection is a family of style lines rather than one part: the Emtek 8405 Select cabinet pulls, the Emtek Alexander cabinet pull, the Emtek Art Deco cabinet pull and the Emtek Bar cabinet pull, all carried as cabinet knob/pull function. If you are matching an existing decorative program, the Emtek Schaub lines let you hold one design language across knobs and pulls; if you need the Mission profile specifically, the CP-18160 is the part.

No, they are a different type of hardware. The Orca CP-18160 is a surface-mounted Mission handle pull that stands proud of the door face on 160 mm centers. The Schaub 10010, 10011 and 10012 Sabre pulls are edge pulls, at 3 inch, 4 inch and 5 inch center-to-center respectively, designed to be worked at the edge of a door or drawer rather than as a face-mounted handle. Pick the edge pull when you want a low-profile grip at the panel edge, and the CP-18160 when you want a conventional face-mounted handle.

It is part of Orca's 18-Mission Collection, so it is styled to run with the rest of that collection. The description calls the styling transitional, which is the middle ground between traditional and contemporary, so it sits alongside shaker and raised-panel doors without looking modern.

No. The Orca CP-18160 is a cabinet handle pull on 160 mm centers, carried as dummy or pull trim, meaning it has no latching mechanism and is grip only. The SDC SP50 is a 50 mm spindle, a door controls component that drives a lockset from lever to lever. They are not interchangeable and a spindle plays no part in mounting the CP-18160.