Orca Hardware CP-18096 Mission Handle Pull, 96 mm CTC

It is specified as residential. For apartment turns, single-family remodels, and spec homes that is the right call. For a school, hospital, or hotel casework package where the hardware gets pulled on hundreds of times a day and has to survive a maintenance contract, look at a heavier solid brass pull instead, such as the Deltana SBP35 modern square bar pull, which is described as heavy-duty solid brass.

No. Orca lists the CP-18096 as not ADA compliant, so it should not be used where cabinet hardware has to meet accessibility requirements, such as accessible kitchen units in multi-family or a barrier-free casework spec. On those openings you need a pull with an operable shape that does not require tight grasping or pinching, and it has to be documented as such.

The Trimco 562 Series drawer pull is the direct alternative at the same spacing, offered in 3-1/2 inch, 4 inch, and 96 mm center-to-center. Everything else in the same class sits at inch spacing: Trimco 553 is 3 inch centers, and the Omnia 1968/102 is 4 inch centers. If your holes are already drilled at 96 mm, the Orca CP-18096 and the Trimco 562 are the two that go straight on.

The Orca Hardware CP-18096 Mission handle pull is drilled at 96 mm center-to-center. If you need a different look on the same hole spacing, the Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch, and 96 mm center-to-center options, so the 96 mm version drops onto the same two holes without redrilling the door or drawer front. Confirm the hole spacing on the existing fronts by measuring center of screw to center of screw before ordering either one.

No, they solve a different problem. The Schaub 10010, 10011, and 10012 are Sabre edge pulls at 3 inch, 4 inch, and 5 inch center-to-center respectively; an edge pull mounts on the edge or face margin of a door or drawer where a projecting handle would not clear. The Orca Hardware CP-18096 is a handle pull at 96 mm center-to-center that stands off the front face for a full hand grip. Choose the edge pull where an adjacent door, appliance, or wall return would strike a standing handle, and the handle pull where there is clearance in front of the face.

The Orca Hardware CP-18096 Mission handle pull is zinc alloy and is specified for residential use. For a forged or solid brass body, the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch center-to-center, and the Omnia 1968/102 is a forged solid brass modern cabinet pull at 4 inch center-to-center. Note that both of those brass pulls use a different hole spacing than 96 mm, so switching to one of them on existing cabinetry means new drilling.

Three: matte black, oil-rubbed bronze, and satin nickel. That covers the usual pairing decisions in a kitchen or bath refit, satin nickel against brushed appliances and faucets, black or oil-rubbed bronze against a darker Mission or Craftsman cabinet. If you are standardizing a building, all three are the same 96 mm pull, so you can run one finish per unit type off the same part number.

Zinc alloy, finished in black, oil-rubbed bronze, or satin nickel. Zinc alloy is cast, so the Mission profile comes out crisp and the pull is light on the door, which suits cabinet doors and drawer fronts in a home. Where a buyer wants forged solid brass instead, the Omnia 1968/102 and Omnia 1970 are forged solid brass cabinet pulls, and Deltana's SBP35 is solid brass as well. Brass costs more and weighs more; the trade is durability and feel, not appearance.

No, it is a 96 mm cabinet pull, sized for cabinet doors and drawer fronts. Appliance doors need a longer, heavier pull mounted on wider centers, and the mounting is a different job. For that, the Schaub 79-8 Steamworks is an 8 inch appliance pull.

Just a handle. Its function is dummy or pull trim, meaning it is fixed hardware for pulling the door or drawer open with nothing operable behind it. Any catch, latch, or lock on that cabinet is separate hardware you order on its own.

No. The CP-18096 is a surface-mounted handle pull that stands off the face of the door on 96 mm centers, so it needs a flat face and it projects into the opening. A flush or sliding panel needs a recessed edge pull instead, like the Schaub Sabre edge pulls, which come in 3 inch, 4 inch, and 5 inch center-to-center.

Step up to an appliance pull. The Schaub 79-8 Steamworks is an 8 inch cabinet pull catalogued for appliance pull duty, which is the length and grip class used on refrigerator, freezer, and range panels where the door is heavy and the pull is grabbed with a full hand. The Orca Hardware CP-18096 Mission handle pull is a 96 mm center-to-center cabinet pull sized for cabinet doors and drawer fronts. Match the appliance pull to the panel height and the cabinet pull to the surrounding doors if you want the two to read as one program.

The CP-18096 is the 96 mm center-to-center handle pull in Orca's 18-Mission Collection. When you are running the same look across base cabinets, uppers, and drawer banks, keep the collection consistent and step the center-to-center to suit each front, ordering the 96 mm CP-18096 wherever the drawer or door takes that spacing. Same finish across all of them keeps the unit reading as one package.

Emtek's Schaub collection covers several distinct profiles on the cabinet pull side: the Bar cabinet pull, the Alexander cabinet pull, the Art Deco cabinet pull, and the Emtek 8405 Select cabinet pull, all catalogued with a cabinet knob/pull function. The Orca Hardware CP-18096 is the Mission collection handle pull at 96 mm center-to-center, offered in Black, Oil-Rubbed Bronze, and Satin Nickel. Pick the Emtek profile that matches the door style, then confirm its center-to-center against your existing holes.

No. The SDC SP50 is a 50 mm spindle, a door controls part that transmits turning motion through a lockset or exit device chassis. The Orca Hardware CP-18096 is a cabinet pull with dummy or pull trim function, meaning it is a fixed grip with no latching action. If you are looking for a graspable handle on a cabinet door or drawer front, the cabinet pull is the part; a spindle is an internal component of a lock, not a handle.